Sikalastic-1K One component cementitious mortar fibre reinforced for flexible waterproofing.Sikalastic -1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain. Sikalastic -1K is suitable for application by brush, roller, trowel or spray equipment. Suitable for negative pressure to 25m Can be applied on damp substrates. Easy to apply by brush, roller, trowel or spray equipment. Good sag resistance and easy to apply, even on vertical surfaces. Good crack-bridging properties. Very good adhesion on many substrates including concrete, cement mortars, stone, ceramics, bricks and timber. Mixing ratio can be adjusted in order to obtain the consistency and workability desired for the intended application
Duramix HiBuild Epoxy
is a two component water based epoxy coating used to prime seal, and coat concrete and masonry surfaces. It cures to a tough chemical and water resistant coating with excellent adhesion to sound concrete. Water based, user friendly. Low odour. Environmentally friendly. Excellent water resistance.Excellent oil resistance. Excellent adhesion to fresh concrete. Applicable to damp surfaces. Resists hydrostatic pressure when cured. Requires a UV resistant top coat when in direct sunlight.
Max is a two pack, flexible, cementitious waterproof membrane designed for both
positive and negative waterproofing for most building and construction
substrates. Crystoflex Max comprising of a liquid component of selected
polymers and a powder component of selected cements, fillers and aggregates.
Crystoflex Max was formulated for demanding waterproof applications including
immersed, potable water or ponding situations, positive or negative
applications, resistance against hydrostatic pressure, under-tile, under-ground
and other construction substrates. Crystoflex Max complies with AS/NZS
4020:2002 Testing of Products For Use In Contact With Drinking Water -
Australian Water Quality Centre Report Number 4007/92.1595 and meets the 'Green
Star' environmental criteria. In ponds and water features where an aesthetic
appearance is required, Crystoflex Max can be top coated with Primeseal which
is compatible and enhances the performance of the entire waterproofing system
MAXSEAL FLEX is a two component product: Component A is a mortar based on a mixture of special cements, additives and well-graded fillers and Component B is a liquid based on special synthetic resin. MAXSEAL FLEX is a coating with flexible and waterproofing properties that adheres to practically every surface such as concrete, natural and artificial stone, mortar plasters, bricks, concrete blocks, etc.
ARDEX WPM 300 - (HydrEpoxy 300) Water Based Epoxy Membrane
Water resistant, prevents rising damp, efflorescence and withstands hydrostatic pressure. Excellent adhesion to most substrates including damp surfaces and freshly laid green concrete. Safe to use in sensitive locations. ARDEX WPM 300 (HydrEpoxy 300) is a two component. water based epoxy polyamide membrane/barrier coating. Approved for use with potable (drinking) water, independent testing confirms conformity with the requirements of AS4020.2000 and BS6920.
Primeseal MC (Moisture Cure)
is a water based, epoxy waterproof membrane. It is a high performance, versatile, two-part, water based, hydrostatic pressure resistant, waterproofing barrier membrane coating suitable for most types of porous and semi-porous surfaces including green (newly laid) hardened concrete and damp surfaces. It cures to form a strong, waterproof, hydrostatic pressure resistant and water vapour pressure barrier and is formulated for application on to damp, newly laid concrete and most other construction surfaces. It is suitable for potable (drinking water) applications and can withstand up to 25 metre head of water pressure. It's versatility makes it also ideal as a primer for waterproofing membranes, paints, industrial coatings and as a bridging coating for normally incompatible coatings. It's standard colour is light grey but is also available in off-white and black (minimum quantities apply). It has very low VOCs and meets the 'Green Star' enviromental criteria