It is a single pack, liquid applied, moisture curing, self levelling, waterproofing membrane which cures to form a seamless, tough, durable, elastomeric (class 3 ) waterproofing membrane. It bonds well to most suitably primed building substrates and is suitable for above and below ground applications. Colour: Grey. It is designed to waterproof most non-exposed applications within the building and construction industry including:
Tiled or Covered Areas: Shower recess & wet areas (floors and upturns), decks, balconies, terraces, podiums, retaining walls, planters & landscaped areas, structural slabs, tanks, pits and bunding areas. Suitable Surfaces:
It is suitable for most building substrates including: C oncrete, Cement, Cement Render, FC and CFC Sheeting, Render, Brick, Block, work, Plaster Board, Masonry, Bitumen (when primed with Primeseal), Metal, Timber, Particle Board and Plywood ( when primed with Primeseal).
Bostik Dampfix PU
One component, highly elastic, class 3, polyurethane waterproofing membrane system that contains no bitumen and complies with AS/NZ 4858. This Technical Data Sheet may be revised, as appropriate, to comply with changes to relevant Australian Standards, reflect changes in Industry best practice in waterproofing procedures or include improvements to current technologies. Bostik Dampfix PU polyurethane waterproofing membrane is specifically formulated for applications where the waterproofing membrane is to be covered by tiling systems laid on an unbonded reinforced screed to falls (ref: Guide to the Installation of Ceramic Tiles - AS3958.1). This is a 2-coat system applied over primed porous & non-porous substrates. It is not recommended as a membrane system in immersed areas (such as pools or spas)
SikaTite PU is a fast curing, single component, class 3 waterproofing membrane. Polyurethane waterproofing membrane for protected applications, under-screed, and non-exposed light foot traffic. Use: Protected waterproofing for use under screeds and protected application. Suitable for use on most building substrates including; concrete, render, screeds, wet area wall sheets, fibre cement sheets, brick and MDF. Characteristics and advantages: Excellent adhesion to most substrates. Fast curing. Permanently flexible. Class III (according to AS3740).
Vulkem 350-SL/351 is an attractive composite deck waterproofing system of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting, eye-appealing, and easy to clean coating. Non-skid surface for pedestrian traffic features use of an aggregate laden top membrane for surest footing. Vulkem 350-SL/351 may be used to apply a seamless, monolithic waterproof membrane to smooth concrete, to well anchored and primed wood, and to primed metal surfaces. Simple, easy to follow procedures and use of conventional tools or optional spray permit fast, sure application.
Multithane HV is a tough, durable, elastomeric,
single pack, liquid applied, moisture curing, cross-linking, polyurethane
waterproofing membrane - usually grey in colour. Multithane HV forms
a tough, flexible, seamless waterproofing membrane designed for both vertical
and horizontal surfaces that bonds well to most suitably primed building
substrates. Multithane HV is formulated as an anti-sag membrane, that although
easy to apply by roller or brush, it can be applied on to vertical
surfaces without slumping to achieve the require film thicknesses. Uses: Multithane HV
is designed to waterproof most applications within the building and
construction industry including: Tiled or covered areas. Shower recess & wet
areas (floors and upturns). Decks, balconies, terraces & podiums. Retaining
walls. Planters and landscaped areas. Structural slabs. Tanks, pits and water
retaining structures. Roofs (covered by pebbles or top coated with Multithane ATC). Suitable Surfaces: Multithane HV is suitable for most
building substrates including: Concrete, Cement and cement block work, FC
Sheeting, Hebel, Render, Brick, Plaster Board, Masonry, Bitumen (if primed with Primeseal). Surfaces should be sound, stable, dry, clean and free of
dirt, dust and contaminants and suitably primed.
Bostik Preamseal Bitum Black Polyurethane Membrane
One-part, bitumen extended highly elastic, moisture curing, polyurethane
membrane. When cured it provides a tough highly elastomeric, impervious barrier
to moisture. Suitable for application by brush, roller or trowel. Bitumen
modified membranes may bleed over time and cause staining. Therefore it is not
recommended for use under tiles or any area where bitumen bleed may discolour
the finished surface appearance. Features: Single component; easy to use, Rapid
curing, Brush, roller or trowel applied, Crack bridging properties up to 1mm,
Provides a seamless waterproofing membrane, Crack bridging properties up to 1 mm, Highly
resistant to water, weather and heat & frost Suitable onto the old bituminous membranes and
asphalt felts, EPDM membranes, Provides excellent thermal resistance over a
temperature span of - 40oC to + 90oC, Resistant to salty water, aqueous
solution, bases, diluted acids and mineral oils, Impregnates by penetrating
deeply into all mineral and concrete surfaces with high adherence. Fills the
non-structural capillary cracks by decreasing water-absorbency of the concrete
construction. Hardens the upper surface of the concrete by deeply penetrating
into the surfaces. Excellent adhesion to masonry surfaces. Non re-emulsifying.
High elasticity. Recommended Uses: Below grade concrete & masonry walls and
footings. Concrete & masonry basement walls and footings. Balconies,
terraces, parking lot and bridge deck. Internal Planter box walls and floors
graded to drainage. Retaining walls. Waterproofing and repair of old bituminous
or EPDM membranes.