|
Vulkem
346
Key
Benefits Summary:
-
Reduced
absorption and permeability.
-
Increased
wear resistance and chemical resistance.
-
Reduced
surface porosity.
-
UV
and weathering resistance.
-
Non
Skid
Description
Ease
of installation giving substantial labour savings.
Vulkem
346 is available in different colours to meet your aesthetic needs.
Heavy
Duty wear coat can be applied at double thickness in critical traffic areas for
extra protection.
UL
790 tested with a Class A Fire Rating
Extreme
impact and abrasion resistance.
When
used in conjunction with Vulkem 350 and Vulkem 345, Vulkem 346 offers increased
resistance to water, anti-freeze, motor oil, hydraulic brake fluid and deicing
chemicals. Vulkem 346 can also be used as a protective paint coating for
properly prepared concrete.
Basic
Uses
Designed
as a waterproof, wear resistant, non-skid deck coating system for parking
decks, roof decks, stadium bleachers, balconies and other areas requiring a
durable coating system.
Packaging
7.5L
and 18.9L Pails.
Colours
Grey,
White, Black, Slate, Red.
Typical
Properties
ASTM
C 957-87 - Standard Specification for High Solids Content. Cold applied
elastomeric waterproofing membrane with integral wearing surface.
Application
Vehicular
Deck Coating System
Vulkem
346 is recommended for use with Vulkem Deck Coating Systems or on concrete (new
or old). Follow Application Directions for Vulkem 350/345/346 when used in the
Vehicular Deck Coating System. Concrete Surfaces Concrete surfaces must be
clean and dry, free of any previous coatings. New concrete shall be water cured
for a minimum of 28 days. Installation can be made with airless spray, medium
nap roller or brush. When used as a paint coating on concrete intended for use
as a wearing surface, it is recommended that an aggregate (Approx. 30-40 mesh)
be incorporated into the coating to increase wear and abrasion resistance. A
successful application may be dependent on proper aggregate size and loading.
In all applications a test patch must be placed and the finish approved by the
owner prior to beginning the job.
Coverage
Concrete
Surfaces Coverage for use as a concrete paint/sealer is dependent on surface
porosity or concrete, number of coats used and aggregate texture chosen and may
range from 1.2 to 2.45 m2 per litre.
Typical
Performance Characteristics
Physical
Data
|
Hardness:
|
85-95
Shore A (ASTM D2240)
|
|
Tensile:
|
3480psi
(ASTM D412)
|
|
Elongation:
|
140%
(ASTM D412)
|
|
Abrasion:
|
0.004g
(ASTM C501)
|
|
