Azcothane Reo is a water-based, flexible, high performance, polyurethane fortified acrylic emulsion waterproofing membrane formulated for use is demanding exposed, under tile, underground and immersed waterproofing applications. Azcothane's Reo formulation complies with AS4858:2004 and is generally applied in accordance with AS3740:2004. It is liquid applied and cures to form a durable, flexible, strong, uv resistant, odourless, seamless, and impervious waterproofing membrane. It does not re-emulsify after it has fully cured making it ideal for long-term waterproofing. It will not stain grout or tiles. Repair leaking balcony liquid rubber membrane
DuraReo a water based, polymer emulsion waterproofing membrane which incorporates micro fibres thereby internally reinforcing the product. It is a modified DuraEF membrane with the addition of the micro reinforcing fibres. It meets the criteria of AS4858:2004 Wet Area Membranes. It is an elastomeric, environmentally friendly membrane designed for both internal and (non-exposed) external application. It cures to form a durable, odourless, impervious, seamless membrane that resists re-emulsifying after it has fully even if immersed in water. It is available in white, black, grey and blue,minimum quantities apply, does not stain grout or tiles and has excellent resistance to hydrostatic pressure
Multithane STD Polyurethane Liquid Membrane
It is a single pack, liquid applied, moisture curing, self levelling, waterproofing membrane which cures to form a seamless, tough, durable, elastomeric (class 3 ) waterproofing membrane. It bonds well to most suitably primed building substrates and is suitable for above and below ground applications. Colour: Grey. It is designed to waterproof most non-exposed applications within the building and construction industry including:
Tiled or Covered Areas: Shower recess & wet areas (floors and upturns), decks, balconies, terraces, podiums, retaining walls, planters & landscaped areas, structural slabs, tanks, pits and bunding areas. Suitable Surfaces:
It is suitable for most building substrates including: C oncrete, Cement, Cement Render, FC and CFC Sheeting, Render, Brick, Block, work, Plaster Board, Masonry, Bitumen (when primed with Primeseal), Metal, Timber, Particle Board and Plywood ( when primed with Primeseal).
Multithane UV is a tough, durable, elastomeric, single pack, liquid applied, moisture curing, cross-linking, polyurethane waterproofing membrane - usually grey in colour. Multithane UV incorporates UV stabilisers, UV absorbers and anti-oxidants to enable the product to provide greater UV protection and stability than conventional aromatic polyurethane membranes. Multithane UV forms a tough, flexible, seamless waterproofing membrane that bonds well to most suitably primed building substrates. Multithane UV represents the highest standards in polyurethane waterproofing technology and provides the following benefits and advantages:
Single pack - no mixing. Fast curing (usually within 24 hours). Permanently flexible ( tests show initial flexibility of > 500%). Suitable for immersion in water. Can be directly tiled. Will not bleed or stain grout or tiles. Available in horizontal (self-levelling) and Vertical Grades (anti-slumping). Good chemical resistance. High strength and puncture resistant. Provides seamless membrane (no joints or laps). Easily repaired and or maintained. Odourless (subjective) when cured. Formulated to provide long term protection. Tar free. Easy to apply. Has good hydrostatic resistance
Bostik Dampfix PU
One component, highly elastic, class 3, polyurethane waterproofing membrane system that contains no bitumen and complies with AS/NZ 4858. This Technical Data Sheet may be revised, as appropriate, to comply with changes to relevant Australian Standards, reflect changes in Industry best practice in waterproofing procedures or include improvements to current technologies. Bostik Dampfix PU polyurethane waterproofing membrane is specifically formulated for applications where the waterproofing membrane is to be covered by tiling systems laid on an unbonded reinforced screed to falls (ref: Guide to the Installation of Ceramic Tiles - AS3958.1). This is a 2-coat system applied over primed porous & non-porous substrates. It is not recommended as a membrane system in immersed areas (such as pools or spas)
Duromastic ACS Fibre
is a liquid applied co-polymer membrane containing a fibrous filament reinforcing. When fully cured itforms a flexible waterproof lining for wet areas as tested to class II Australian Standard AS:4858-2004 "Wet Area Membranes". This membrane complies to AS:3740-2004 " Waterproofing of wet areas within residential buildings". It forms a waterproof lining to most building materials including reinforced concrete, cement render, water resistant plasterboard and fibre reinforced cement sheet flooring etc. The surface must be firmly fixed to manufacturers directions, free of protrusions, dirt, oil and other contaminants and surface must be dry.
Elastic Liquid Membrane Sikalastic 560
Economical and eco-friendly liquid applied roof waterproofing solution based on Sika Co-Elastic Technology (CET) UV resistant and resistant to yellowing and weathering. Highly elastic and crack-bridging. Non-toxic and VOC compliant water based coating. One component - ready to use. Excellent adhesion on porous and non porous substrates Seamless waterproofing membrane. Water vapour permeable. 12 months shelf life. Approved in accordance with AS 4020 and AS 4858. Approval for Use in Potable Water and Wet Area applications.
TREMproof 100 (DEXX) is a heavy bodied liquid applied acrylic membrane waterproofing system.Excellent UV resistance. Trafficable - excellent abrasion resistance. Suits a wide range of substrates. System enhancement through a range of primers and top coats to optimise performance. Excellent adhesion. Wide range of colours. For new construction or refurbishments. Water based, easy clean up. Ready to use, no mixing required.
Waterproofing of; Exposed roofs. Walkways-Requires double reinforcement, see Usage Guidelines. Parking decks with light vehicle traffic. Requires double reinforcement Parapet walls. Plant/mechanical rooms and floors. Internal wet areas. Balconies.
Decks. Requires double reinforcement