Wrimco Waterproofing                              Home  | Specification | Product | Project | Technical data A-Z | Contact us

Adhesive Membrane

Anti-root Membrane

Approved Applicators

Backing Rod

Drainage Cell

Drainage Sheet

Epoxy Adhesive

Epoxy Flooring

Flat Roof Membrane  

Foundation Membrane

Liquid Membrane

Membrane Protection

Product Application

Product Category

Retaining Wall

SBS Sheet Membrane

Torch on Membrane

Under Slab Membrane

Vapour Barriers

Waterproofing Primer

 

Waterproof Balcony Liquid Membrane Waterproof Bathroom liquid membrane Waterproof Retaining Wall Liquid Rubber Membrane How to waterproof a bathroom Waterproof Internal Wet Area Membrane Waterproof Tiled Balcony Clear Penetrating Sealer Trafficable liquid membrane UV Protection liquid membrane Waterproof Water Feature liquid membrane Hydro Pressure Resistant liquid membrane Waterproof Shower Recess liquid membrane Repair Roof Gutters liquid Membrane Waterproof Planter Box liquid membrane Waterproof Under Tiles Liquid Membrane Waterproof Water Tanks liquid membrane waterproof Flat Roof liquid membrane Waterproof fish pond liquid membrane Waterproof Swimming Pool  How to stop tiled deck leaking waterproof bathroom liquid membrane Waterproof Leaking Shower Tradesman Waterproof Leaking Balcony Liquid Membrane Waterproof Damp Basement Wall Liquid Membrane Crystoflex Max Cementetious waterproofing membrane Waterproof Under Screed Liquid Membrane Waterproof above screed liquid membrane How to waterproof a Planter Box How to waterproof a shower How to waterproof tiled balcony Waterproof Roofs with UV liquid membrane How to waterproof a metal roof Sikalastic 560 - Repair Bitumen membrane Roof How to waterproof a planter box Waterproof Flat roof liquid membrane Below Grade Membrane UV Resistant Polyurethane Membrane Waterproof leaking balcony liquid membrane waterproof damp basement wall liquid membrane Solutions to common waterproofing problems Maxseal Foundation Mapelastic Smart Membrane Polyurethane Membrane MasterSeal M210TIX Latex Rubber Liquid Membrane Waterproof wet basement wall liquid membrane Waterproof leaking Basement Tradesman Waterproof Building Contractors Waterproof Lift Pit Contractors Waterproof leaking Internal Wall tradesman Waterproof leaking deck tradesman waterproof leaking roof, gutters, balcony, car park tradesman Waterproof leaking Box Gutter Tradesmen Waterproof leaking External Wall tradesmen Waterproof Swimming Pool Contractors Waterproof Garage Roof Liquid Membrane Injection Drill Pump Vulkem 350/345/346 Ardex WPM 300 Epoxy - Stop Rising Damp Ardex WPM300 Waterproof Metal Roof Liquid Membrane Waterproof Leaking Under Tiles Liquid Membrane Repair Leaking Balcony, Flat Roof, Planter Box, Bathroom Waterproofer, waterproof Leaking Balcony, Flat Roof, Planter Box, Bathroom tradesman, handyman Waterproof exposed balcony liquid membrane Hydrostatic Pressure resistant Liquid Membrane Waterproof Box gutter liquid membrane Prevent Rising Damp Waterproofing Epoxy Waterproof leaking metal roof tradesman Waterproof Retaining Wall liquid membrane Waterproof Underground Walls liquid membrane Waterproof Internal, External Wall Liquid Membrane Waterproof Concrete Slab Liquid Membrane Waterproof Balcony Liquid Membrane Stop Leaking Shower Liquid Membrane How to repair a leaking fish pond Waterproof Wet Retaining Wall Liquid Membrane Waterproof Aluminium Roof Liquid Membrane How to waterproof a retaining wall How to waterproof a Retaining Wall Waterproof cement screed epoxy Vulkem 360NF Waterproof Car Park Liquid Membrane Waterproof Retaining Wall liquid membrane Waterproof Besser Block Wall Liquid Membrane How to fix leaking fish pond Waterproof Garage Roof Liquid Rubber Membrane Trafficable UV resistant liquid membrane Stop Basement Wall Leaking UV Resistant Polyurethane Liquid Membrane Waterproof water tanks for drinkable water Waterproof Commercial Roof, Balcony Contractors
Commercial Building Sheet Membrane Concrete Roof Sheet Membrane Waterproof Deck Sheet Membrane Entertainment building Waterproofing Membrane Waterproof Government Building Sheet Membrane Waterproof Hospital Building Sheet Membrane Waterproof Landmark Building Bitumen Membrane Waterproofing Planter Box Sheet Membrane Waterproof Plywood Roof Sheet Membrane Waterproof Residential Building Sheet Membrane Waterproof Roof Bitumen Sheet Membrane Waterproof Flat Roof Sheet Membrane Waterproof Retaining Wall Sheet Membrane Terrace waterproofing Sheet Membrane Waterproof University Building Sheet Membrane Wrimco Reference Waterproof Lift Pit Sheet Membrane Waterproof Car Park Roof Sheet Membrane Waterproof Concrete Slab Sheet Membrane Waterproof Concrete Roof Sheet Membrane Tanking Sheet Membrane Systems Vaucluse Waterproofing Project  Mosman Waterproofing Project Waterproofing Palm Beach Waterproofing Dover Height Waterproofing Darling Point Waterproofing Bellevue Hill waterproofing tradesman Under Concrete Slab Waterproofing Knowledge Base FAQ Waterproofing Product Waterproof Leaking Swimming pool tradesman Waterproof Leaking Garage Roof tradesman Repair SBS, APP Sheet Membrane Waterproof Concrete Slab Sheet Membrane Waterproof Leaking Garage Roof Liquid Rubber Membrane Waterproof Leaking Metal Roof Liquid Rubber Membrane Polyurethane Modified Acrylic Liquid Rubber Membrane Waterproof Balustrade Sheet Membrane Waterproof Commercial Building Project Bitumen Sheet Membrane Waterproofing Membrane Protection Drainage Cell Closed Cell Backing Rod Repair Crack Joints Closed cell backer rod Expansion joint backing rod Backing Rod waterproof leaking laundry tradesman Repair Leaking underground basement wall Waterproofer Waterproof leaking planter box tradesman Waterproof Leaking Shower Tradesman Waterproof Planter Box Tradesman Waterproof Box Gutter Tradesman

Damp Proof Epoxy Coating:  

 
 
 
DuroHibuild WBE
 
is a two component water based epoxy coating used to prime seal, coat concrete and masonry surfaces. It cures to a tough chemical and water resistant coating having excellent adhesion to sound concrete. 
 
Packaging: 20 litre, 4 litre
 
PRINCIPLE CHARACTERISTICS  

 

Water based, user friendly  

Low odour
Damp Proof
Environmentally friendly    

Excellent water resistance  

Excellent oil resistance.  

Excellent adhesion to fresh concrete  

Applicable to damp surfaces  

Resists hydrostatic pressure when cured

 

Requires a UV resistant top coat when in direct sunlight  

 

USE AREAS  

 

Fish ponds  

Retaining walls  

Reverse tanking  

Primer for acrylic & polyurethane membrane  

Dust sealing concrete floors  

Waterproofing concrete slabs before vinyl and timber overlays  

Concrete curing membrane  

Moisture barrier on damp walls/floors  

 

GENERAL
    
Shelf Life: 12 months in unopened containers stored above 5 C and below 20 C

Pot Life: 1.5 hours at 20 C  

Touch Dry: 4 - 5 hours at 20 C, 50% RH
Recoat time: 5 hours at 20 C, 50% RH  
 
Full cure: 5 days at 20 C,  50% RH
Coverage: Min 2 coats, each at 0.3 Litres/m2 [3m2/Litre]

Weather Resistance: Good  

Colour (Mixed): Grey, matt finish

Mix Ratio: 1:1 by volume
Wet film per coat: 0.3mm thick   

Storage: Above 5 C and below 20 C   

Clean Up: Clean equipment with water before setting commences  

 

 

SURFACE PREPARATION
 
All surfaces must be structurally sound and all previous coatings, adhesives, efflorescence or laitance should be removed by chipping, abrasive blast cleaning, high pressure water washing, mechanical scrubbing or other suitable means. All surfaces must be cleaned free from dirt, grease oil or other surface contaminants. Holes, non-structural cracks and other surface deformities should be repaired.
 
APPLICATION

 

Porous concrete will require 3 coats of DuroHibuild WBE. The first acting as a primer, should be diluted 10% with water to allow penetration into the pores of the concrete. Then apply 2 full coats. Mixing should be by means of a mechanical forced action mixer with a high shear stirrer. Premix each individual component then join the two components, by equal volume, mixing thoroughly for a minimum of 5 minutes until a blended coating is obtained. Avoid trapping air during mixing as this may cause pin holing. Only mix as much as may be used within the pot life of the product. It is a minimum two-coat system. Apply with a brush or roller, and ensure to work the material into the substrate surface to fill voids and eliminate pin holing. Successive coats should be applied at right angles to the previous coat. It is recommended that the coating depth be tested at random points with a wet film gauge. 
 

CLEAN UP  

 

Wash all equipment in water and or detergent immediately on completion.  

It will cure under water, hence do not leave items soaking.
 

PRECAUTIONS  

 

Refer to MSDS prior to use. It's cure rates will be dramatically reduced if the relative humidity is above 85%. Do not apply to steel or metal surfaces. Do not add cementitious products to DuroHibuild WBE. It is not a waterproof membrane on its own. A dedicated waterproofing membrane should be used. In enclosed areas, such as water tanks or reservoirs, basements, or cubicles, ventilation should be provided to enable adequate evaporation of the coating. Allow to cure for a minimum of 24hours at 25 oC/50% RH before applying waterproof membranes, adhesives, mortars, decorative coatings or other surface treatments. It will tend to chalk when exposed to UV light. For external use apply a UV resistant top coat. Discard any materialthat has exceeded the pot life or working time of the product. Do not apply over any substrates that have been previously treated or coated with curing compounds, PVA concrete bonding agents or acrylic coatings. These areas must be mechanically cleaned by grinding or shot blasting to produce a contamination free surface.  

 

COLD SUBSTRATES AND COOL CLIMATIC CONDITIONS  

 

Cure speed will be dramatically reduced if substrate surface or ambient temperature is below +10 o\C. If it is applied in cooler climatic conditions, substrate temperatures can produce amine blush, resulting in an oily residue and or areas of uncured tacky discolorations. It should be allowed to cure, then washed with clean, fresh water, Meythylated Spirits or Xylene depending on the severity. Ensure removal of the contamination prior to application of any further coating to ensure no delamination. Follow mixing instructions and allow an extra minute to ensure a homogeneous paste is obtained. Allow to stand for 5 minutes after mixing as this will accelerate the drying time. Never apply thin coats as the rapid moisture loss will arrest or slow the drying reaction. Thin coats can also cause an amine blush. Store it in a 20 C environment 24 hours prior to use. If possible warm the substrate surface area by an air blower or use a blower after application. Always provide adequate ventilation during the curing cycle.

DuroWBE Hibuild pack A MSDS:   

Duromastic WBE Hibuild Pack A Hibuild Material Safety Data Sheet  

 

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION  

 

Classified as Hazardous according to criteria of NOHSC  

UN NO: None allocated D.G. Class: None allocated Pack. Group: None allocated  

HAZCHEM: None allocated SUB. RISK: None allocated SUSDP: None allocated  

PROPER SHIPPING NAME : None Allocated  

PRODUCT USE: Resin component for two part epoxy coating  

 

2. COMPOSITION / INFORMATION ON INGREDIENTS  

 

Component  

CAS No  

Weight %  

Epoxy Resin  

25068-38-6  

30-60  

Water  

7732-18-5  

30-60  

Inert Pigments  

-  

30-60  

Non hazardous Ingredients  

-  

 

 
See Section 8, Exposure Controls / Personal Protection  

 

3. HAZARDS IDENTIFICATION  

 

Chronic Effects Prolonged or repeated contact may result in skin sensitization. Inhalation of the vapours (generated at elevated temperatures) or mists can cause irritation to the nose, throat and upper respiratory tract. Ingestion May be harmful if swallowed in large amounts. Ingestion may cause nausea,  

diarrhoea, abdominal pain and vomiting. Skin Irritating to skin. Frequent and prolonged contact may cause skin sensitization. Eye Substance is irritating to the eyes. Contamination of the eyes will result in  

transient pain, lachrymation and redness.  

 

4. FIRST AID MEASURES  

 

Eyes: Immediately flush with water for 15 minutes. Get medical advice if irritation develops or persists. Take care not to rinse water into the non-affected eye.  

Skin: Take off all contaminated clothing. Wash contaminated area with soapy warm water. Get  

medical advice if irritation develops or persists. Wash contaminated clothing and clean shoes before reuse.  

Inhalation: Remove to fresh air. If not breathing, give artificial respiration, preferable mouth to mouth. If  

breathing is laboured, give oxygen and consult a physician immediately. Never give anything by mouth to an unconscious person.  

Ingestion: Consult a physician immediately. Do not induce vomiting. Give one or two glasses of water  

to drink. If vomiting occurs, aspiration into the lungs may cause lung damage. Never give anything by mouth to an unconscious person.  

 

5. FIRE FIGHTING MEASURES  

 

Flash Point: Not Applicable  

Auto-ignition Temperature: No data available  

Lower Explosive Limit: No data available  

Upper Explosive Limit: No data available  

Suitable Extinguishing Media:  

Use as appropriate for surrounding fire.  

Protective Equipment for Fire Fighting:  

Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.  

Unusual Fire and Explosion Hazards:  

The product is not flammable.  

 

6. ACCIDENTAL RELEASE MEASURES  

 

Eliminate all sources of ignition. Provide sufficient ventilation. Wear appropriate personal protective  

equipment including gloves and safety glasses. Do not breathe vapour. Contain spill. Do not allow into  

drains or waterways- inform local authorities if this occurs.. Take up with absorbent material (e.g. sand,  

vermiculite, or commercially available inorganic absorbent). Use non-sparking tools and equipment. Fill  

into suitable containers for disposal. Clean area with detergent or water.  

Dispose of empty containers in accordance with federal, state and local laws.  

 

7. HANDLING AND STORAGE  

 

Handling: Observe normal standards of industrial hygiene for handling chemicals. Eliminate all sources  

of ignition. Use in a well-ventilated area. Avoid breathing vapour and contact with skin and eyes. Wear  

gloves, long sleeved shirt, and eye protection.  

Storage: Store away from alkalis and oxidisers. Store in tightly sealed containers to protect from  

atmospheric moisture in a cool, dry area. Avoid freezing temperatures. Minimise contact with atmospheric  

air to prevent inoculation with micro organisms. Keep away from ignition sources such as fire, flame and  

sparks.  

Empty container warning: Do not reuse empty drums or containers unless professionally cleaned. Do  

not cut, drill, grind or weld on or near empty containers.  

Other Precautions: Do not eat, drink or smoke when using the product.  

 

8. EXPOSURE CONTROLS / PERSONAL PROTECTION  

 

Exposure Limit Information   
 

 

NOHSC1  

 

TWA  

STEL  

Component  

(ppm)  

(mg/m3)  

(ppm)  

(mg/m3)  

Epoxy Resin  

-  

a  

-  

-  

 

-  

a  

-  

-  

 

-  

10b  

-  

-  

 
a = not listed  

b = as nuisance dust  

c = per ACGIH  

TWA = Time Weighted Average  

STEL= Short Term Exposure Limit  

National Occupational Health and Safety Commission ( Australia)  

 
Respiratory Protection

If vapours and mists occur, a respiratory protection program meeting Australian Standards AS- 1716 and AS-1715 requirements must be followed whenever workplace conditions warrant a respirator's use. None required if airborne concentrations are maintained below the exposure limit listed in "Exposure Limit Information"  

 
Eye Protection

Use chemical splash goggles (Australian Standard AS-1337) or approved equivalent. Eye  

protection worn must be compatible with respiratory protection system employed. An eye wash station and safety shower should be available in the work area.  

 
Hand Protection

Impermeable gloves as necessary to prevent skin contact. E.g. nitrile or neoprene gloves.  

 
Protective Clothing  

Clothing made of the following material has excellent resistance: Tyvec, butyl nitrile rubber or  

neoprene.  

 
Engineering Controls (Ventilation)  

Use local exhaust ventilation sufficient to maintain exposure levels below exposure limit  

concentrations. Refer to Australian Standard AS-1668.  

 

9. PHYSICAL AND CHEMICAL PROPERTIES  

 

Appearance and colour: White  

State: Liquid  

Odour Characteristic: No data available  

pH : Not specified  

Viscosity: No data available  

Specific Gravity (Water = 1): 1.45  

Vapour Density (Air = 1): No data available  

Vapour Pressure: 1  

Melting Point: Not Applicable  

Boiling Point: Not Available  

Solubility in Water: Dispersible.  

Flash Point: No data available  

 

10. STABILITY AND REACTIVITY  

 

Considered stable under normal conditions of use and handling.  

Hazardous decomposition products  

Combustion products: oxides of carbon and noxious smoke  

Materials to avoid  

Oxidising agents (e.g. perchlorates, nitrates etc)  

Conditions to avoid  

Not applicable  

 

11. TOXICOLOGICAL INFORMATION  

 

Acute Data Not established for this product.  

Inhalation: May cause coughing, nausea, tightness of the chest with difficulty breathing. May  

cause irritation of the nose, throat and respiratory tract.  

Ingestion: May cause irritation of the mouth, pharynx, oesophagus and stomach causing pain,  

abdominal tenderness, nausea, diarrhoea and vomiting.  

Skin irritation: May cause irritation resulting in redness, rash and itching.  

Eyes irritation: May cause chemical related eye burns.  

Chronic effects: Prolonged and repeated contact can result in skin sensitivity and allergic skin reactions  

(rashes, hive-like swelling, blisters) resulting in dermatitis.  

 

12. ECOLOGICAL INFORMATION  

No available data.  

 

13. DISPOSAL CONSIDERATIONS  

Do not reuse empty drums or containers unless professionally cleaned. Do not cut, drill, grind or weld on  

or near empty containers. Dispose of waste and empty containers in accordance with federal, state and  

local laws.  

 

14. TRANSPORT INFORMATION  

Classified as Dangerous Goods according to the Australian Code For The Transport Of Dangerous  

Goods By Road And Rail (Sixth Edition). See section 1.  

 

15. REGULATORY INFORMATION  

 

Labelling Requirements:  

According to Criteria of National Occupational Health and Safety Commission - Australia  

R36/38 Irritating to eyes and skin.  

R43 May cause sensitization by skin contact  

S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical  

advice. Contact a doctor or Poisons Information Centre  

S28 After contact with the skin wash immediately with plenty of water and seek medical  

advice.  

S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.  

 

16. OTHER INFORMATION  

 

1 National Occupational Health and Safety Commission - Australia  

2 Australian Code For The Transport Of Dangerous Goods By Road And Rail (Sixth Edition).  

The advice and information contained herein is based on the original suppliers information.  

Duromastic WBE Hibuild pack B MSDS:   

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION  

 

Classified as Hazardous according to criteria of NOHSC  

Poison Schedule Number S5

UN NO:  

None allocated  

D.G. Class:  

None allocated  

Pack. Group:  

None allocated  

HAZCHEM:  

None allocated  

SUB. RISK:  

Nonee allocated  

SUSDP:  

5   

 
PROPER SHIPPING NAME : Non allocated  

PRODUCT USE: Hardener Surface coating.  

 

2. COMPOSITION / INFORMATION ON INGREDIENTS  

 

Component  

CAS No  

Weight %  

Polymer  

*  

10-30  

Amines ( hazardous)  

Various  

<2  

Acetic acid  

64-19-7  

<0.5  

Other additives  

*  

<2  

Water  

Not Required  

60-80  

* substances either not classified as hazardous or below relevant concentration cut-offs.  

See Section 8, Exposure Controls / Personal Protection

 

3. HAZARDS IDENTIFICATION  

 

Causes burns.  

Risk of serious eye damage.  

May cause sensitisation by skin contact.  

 

4. FIRST AID MEASURES  

 

Eyes: Immediately flush with water for 15 minutes. Get prompt medical attention  

Skin: Immediately take off all contaminated clothing and wash contaminated area with soapy  

 

warm water. Get medical attention if irritation develops or persists. Wash contaminated clothing before reuse.  

Inhalation: Remove to fresh air. Apply resuscitation if victim is not breathing. Get medical attention.  

Ingestion: If product is swallowed, do NOT induce vomiting; wash mouth with water and give some water to drink. Get urgent medical attention.  

 

5. FIRE FIGHTING MEASURES  

 

Flash Point: No data  

Auto-ignition Temperature: No data  

Lower Explosive Limit: Not applicable  

Upper Explosive Limit: Not applicable  

Suitable Extinguishing Media:  

Foam, carbon dioxide or dry chemical. Water spray or fog for large fires only.  

Protective Equipment for Fire Fighting:  

Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.  

Fire Fighting Procedures:  

Use water spray to cool exposed containers. Stay up-wind and fight fire from a safe distance. Prevent spillage from entering drains or watercourses.  

Decomposition Products:  

Decomposes with fire to give off toxic and irritating fumes.  

 

6. ACCIDENTAL RELEASE MEASURES  

 

Small Spills: Caution : floor may be slippery. Wear suitable protective equipment and clothing to prevent eye and skin contact. Contain spill. Do not allow into drains or waterways. Take up with inert absorbent material (e.g. sand, dirt, or vermiculite). Fill into marked, sealable containers for disposal. Dispose of empty containers in accordance with federal, state and local laws.  

Large Spills: Notify Emergency Services and advise nature of spill and material hazard. Isolate area.  

 

7. HANDLING AND STORAGE  

 

Handling - Do not use reactive metal containers or implements such as copper, brass, galvanised, zinc or tin plated. Avoid inhaling vapour and/or mists. Avoid contact with skin, eyes, and clothing. Wear suitable protective equipment and clothing to prevent eye and skin contact. See Section 8.  

Storage - Do not store in reactive metal containers. Store away from incompatible materials. See Section 10.  

 

8. EXPOSURE CONTROLS / PERSONAL PROTECTION  

Exposure Limit Information
 

 

ASCC          

     

TWA  

STEL  

Component      

(ppm)  

(mg/m3)  

(ppm)  

(mg/m3)  

Polyamine polymer      

a  

-  

a  

-  

Triethylenetetramine  

a  

-  

a  

-  

Amino phenol  

a  

-  

a  

-  

 

a = not listed  

TWA = Time Weighted Average  

STEL= Short term Exposure Limit  

1 Australian Safety and Compensation Council  

Respiratory Protection  

In case of vapours or dust, a respiratory protection program meeting Australian and New Zealand  

Standards AS/NZS-1715 and AS/NZS -1716 requirements must be followed whenever workplace  

conditions warrant a respirator's use. None required if airborne concentrations are maintained below the exposure limit listed in "Exposure Limit Information"  

Eye Protection Use chemical splash goggles (Australian and New Zealand Standards AS/NZS-1337) or approved equivalent. Eye protection worn must be compatible with respiratory protection system employed.  

Hand Protection  

Chemical resistant gloves and protective clothing as necessary to prevent skin contact.  

Engineering Controls (Ventilation)  

Use local exhaust ventilation sufficient to maintain exposure levels below exposure limit concentrations. Refer to Australian Standard AS-1668.  

   

9. PHYSICAL AND CHEMICAL PROPERTIES  

   

Appearance and colour: Light grey, viscous  

State: Liquid  

Odour Characteristic: Amine  

pH: Not specified  

Viscosity: Not specified  

Specific Gravity (Water = 1): 1-1.5  

Vapour Density (Air = 1) : No data  

Vapour Pressure: No data  

Melting Point: ~0C water  

Boiling Point: ~100C water  

Solubility in Water: Soluble  

Flash Point: No data  

   

10. STABILITY AND REACTIVITY  

   

Considered stable under normal conditions of use and handling.  

Hazardous decomposition products:  

Oxides of carbon and nitrogen. Decomposition by heat may give off toxic and irritating fumes.  

Materials to avoid:  

O xidising agents and strong acids.  

   

11. TOXICOLOGICAL INFORMATION  

   

No toxicity data available for product.  

Acute Toxicity  

Eyes: Causes burns. Risk of serious eye damage. Severely irritating to eyes.  

Skin: Causes burns. Severely irritating to skin. May cause sensitisation.  

Ingestion: Corrosive. Expected to be harmful.  

   

12. ECOLOGICAL INFORMATION  

   

Toxic to aquatic organisms.  

Keep out of waterways, drains and sewers.  

   

13. DISPOSAL CONSIDERATIONS  

   

Do not empty into drains or waterways.  

Dispose of empty containers in accordance with federal, state and local laws.  

   

14. TRANSPORT INFORMATION  

   

Not classified as Dangerous Goods according the Australian Code For The Transport Of Dangerous  

Goods By Road And Rail (Seventh Edition). See Section 1.  

   

15. REGULATORY INFORMATION  

   

Workplace Labelling Requirements:  

According to Criteria of the Australian Safety and Compensation Council.  

Risk Phrases  

R34 Causes burns.  

R41 Risk of serious eye damage.  

R43 May cause sensitisation by skin contact.  

Safety Phrases  

S24/25 Avoid contact with skin and eyes.  

S37/39 Wear suitable gloves and eye/face protection.  

S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.  

S28 After contact with skin, wash immediately with plenty of soap and water.  

   

16. OTHER INFORMATION  

   

Australian Safety and Compensation Council  

Australian Dangerous Goods Code - Seventh Edition

   

 

Waterproofing FAQ

Membrane Protection Board

Waterproofing Coating

Waterproof Drainage Sheet

Waterproofing Primer

Repair and Maintenance