Wrimco Waterproofing                              Home  | Specification | Product | Project | Technical data A-Z | Contact us

Adhesive Membrane

Anti-root Membrane

Approved Applicators

Backing Rod

Drainage Cell

Drainage Sheet

Epoxy Adhesive

Epoxy Flooring

Flat Roof Membrane  

Foundation Membrane

Liquid Membrane

Membrane Protection

Product Application

Product Category

Retaining Wall

SBS Sheet Membrane

Torch on Membrane

Under Slab Membrane

Vapour Barriers

Waterproofing Primer

 

Waterproof Balcony Liquid Membrane Waterproof Bathroom liquid membrane Waterproof Retaining Wall Liquid Rubber Membrane How to waterproof a bathroom Waterproof Internal Wet Area Membrane Waterproof Tiled Balcony Clear Penetrating Sealer Trafficable liquid membrane UV Protection liquid membrane Waterproof Water Feature liquid membrane Hydro Pressure Resistant liquid membrane Waterproof fish pond liquid membrane waterproof bathroom liquid membrane Waterproof above screed liquid membrane UV Resistant Polyurethane Membrane Waterproof leaking balcony liquid membrane waterproof damp basement wall liquid membrane Solutions to common waterproofing problems Maxseal Foundation Polyurethane Membrane MasterSeal M210TIX Latex Rubber Liquid Membrane Waterproof wet basement wall liquid membrane Injection Drill Pump Vulkem 350/345/346 Ardex WPM 300 Epoxy - Stop Rising Damp Waterproof Metal Roof Liquid Membrane Repair Leaking Balcony, Flat Roof, Planter Box, Bathroom Waterproofer, waterproof Leaking Balcony, Flat Roof, Planter Box, Bathroom tradesman, handyman Waterproof Box gutter liquid membrane Waterproof Retaining Wall liquid membrane Waterproof Internal, External Wall Liquid Membrane Waterproof Concrete Slab Liquid Membrane Waterproof Balcony Liquid Membrane Stop Leaking Shower Liquid Membrane How to waterproof a retaining wall How to waterproof a Retaining Wall How to fix leaking fish pond Waterproof Garage Roof Liquid Rubber Membrane Waterproof water tanks for drinkable water Waterproof Leaking Roof, Gutters, Balcony, Car Park tradesman Waterproof leaking box gutters tradesman Repair Leaking Balcony, Flat Roof, Planter Box, Bathroom Waterproofer   Repair Leaking Balcony, Flat Roof, Planter Box, Bathroom Waterproofer   HiBuild Hydrastatic Water based Epoxy Hydrostatic Negative Pressure Water Based Epoxy Under tile screed bed waterproofing membrane Prevent and Fix Rising Damp Waterproofing Epoxy Waterproof exposed balcony liquid membrane Repair leaking balcony waterproof liquid membrane Waterproof Bathroom Liquid Membrane Planter Box Retaining Wall Tanking Liquid Membrane Waterproof Leaking Metal Roof Waterproofer HOw to repair leaking fish pond Waterproof Underground wall Liquid Membrane Waterproof Planter Box liquid membrane Waterproof Watertanks Cementitious Liquid Membrane Waterproof Lift Pit Liquid Membrane ARDEX WPM 001 - Undertile Waterproofing Membrane Waterproof Planter Box Root Resistant Liquid Membrane Repair Bitumen Roof Waterproofing Liquid Membrane UV Protective Polyurethane Membrane Waterproof External Brick Wall liquid membrane Waterproof Retaining Wall Liquid Membrane Waterproof Planter Box Liquid Membrane Waterproof Wet Retaining Wall Liquid Membrane Waterproof Leaking External Wall Licensed Waterproofer Emer Clad Acrylic Liquid Membrane Waterproof Planter Box, Retaining wall liquid membrane Fast Cure Elastomeric Waterproofing Membrane Systems Waterproof Leaking Swimming pool tradesman UV Resistant Acrylic Liquid Membrane How to Waterproof a Leaking Metal Box Gutter Sikalastic 560 - Repair Bitumen membrane Roof Waterproof Lift Pits Tradesmen Waterproof Leaking Kitchen Tradesmen Waterproof Leaking Internal Basement Walls tradesman Waterproof Leaking Laundry tradesman Waterproof Leaking Deck, Verandah Tradesman Waterproof Leaking Roof, Gutters, Balcony, Car Park Tradesman Repair Bitumen Roof Liquid Rubber Membrane Waterproof Besser Block Wall with Liquid Membrane Waterproof leaking bitumen roof contractors Waterproof leaking bitumen roof contractors  Waterproof Leaking Retaining Wall, Basement Wall Tradesmen
Commercial Building Sheet Membrane Concrete Roof Sheet Membrane Waterproof Deck Sheet Membrane Entertainment building Waterproofing Membrane Waterproof Government Building Sheet Membrane Waterproof Hospital Building Sheet Membrane Waterproof Landmark Building Bitumen Membrane Waterproofing Planter Box Sheet Membrane Waterproof Plywood Roof Sheet Membrane Waterproof Residential Building Sheet Membrane Waterproof Roof Bitumen Sheet Membrane Waterproof Flat Roof Sheet Membrane Waterproof Retaining Wall Sheet Membrane Terrace waterproofing Sheet Membrane Waterproof University Building Sheet Membrane Wrimco Reference Waterproof Lift Pit Sheet Membrane Waterproof Concrete Roof Sheet Membrane Tanking Sheet Membrane Systems Vaucluse Waterproofing Project  Mosman Waterproofing Project Waterproofing Palm Beach Waterproofing Dover Height Waterproofing Darling Point Waterproofing Bellevue Hill waterproofing tradesman Knowledge Base FAQ Waterproofing Product Waterproof Leaking Garage Roof tradesman Repair SBS, APP Sheet Membrane Waterproof Concrete Slab Sheet Membrane Waterproof Leaking Garage Roof Liquid Rubber Membrane Waterproof Leaking Metal Roof Liquid Rubber Membrane Waterproof Balustrade Sheet Membrane Waterproof Commercial Building Project Bitumen Sheet Membrane Closed Cell Backing Rod Repair Crack Joints Closed cell backer rod Expansion joint backing rod Backing Rod Waterproof Leaking Roof, Balcony, Box Gutter tradesman Repair Leaking underground basement wall Waterproofer Waterproof Leaking Shower, Bathroom, Wet area Tradesman Repair Leaking Deck, Planter Box Waterproofer Waterproof Leaking Fish Pond Tradesman Waterproof Rising Damp Basement Tradesmen Roofs Waterproofed with Wrimco Sheet Membrane Waterproof Retaining walls with sheet membrane Waterproof Balcony with Sheet Membrane HDPE Self Adhesive Sheet Membrane Waterproof Commercial High Rise Building Roof Contractors Waterproof Car Park Roof with sheet membrane Ardex WPM 116 Sheet Membrane Ardex WPM 150 APP Sheet Membrane ARDEX WPM 188 Garden Tanking Membrane ARDEX WPM 185 APP Sheet Membrane Ardex WPM320 Retaining Wall Sheet Membrane Waterproof Deck with torch applied Sheet Membrane ARDEX WPM612 FL TPO Fleece-Backed Roof Membrane TREMproof SBS 4000M Mineral Bituminous Membrane ARDEX WPM 1000 Weldable Waterproofing Membrane SBS Sheet Membrane Installation ARDEX WPM 3000X peel and stick membrane ARDEX WPM 750 Undertile Butynol  Waterproof Concrete Slab with Sheet Membrane ARDEX WPM 444 APP Sheet Membrane How to waterproof a Retaining wall How to waterproof a Planter Box How to waterproof a planter box How to waterproof Tiled Balcony with clear sealer How to waterproof a Shower  Ardex SRO 834 Waterproofing Specification Wrimco Sheet Membrane Waterproof elevator pits Sheet Membrane SBS Sheet Waterproofing Membrane How to waterproof balcony with sheet membrane Anti Root Sheet Membrane Vehicular Traffic Liquid Membrane Waterproof Planter Box with torch applied sheet membrane Waterproof Balconies Decks Podiums Prevent Rising Damp Hydro Static Epoxy How to waterproof a planter box 

Waterproof Planter box Root Resistant Membrane :


MasterSeal HLM 5100TIX   

Water-based, single component, bitumen free thixotropic liquid applied waterproofing membrane   

DESCRIPTION   

MasterSeal HLM 5100TIX is a single component, bitumen free water based, polymer waterproofing membrane that cures by crosslinking to form a tough membrane. MasterSeal HLM 5100TIX protects structures from water penetration while remaining flexible to handle the nominal expansion and contraction of substrates.

MasterSeal 5100TIX meets the requirements of:

 

  • AS/NZS 4858:2010
  • AS3740:2010
  • Green Building Council of Australia in accordance with SCAQMD Method 304-91 Determination of Volatile Organic Compounds (VOC)   

 

Recommended Uses   

MasterSeal HLM 5100TIX is used for waterproofing of vertical areas including but not limited to: exterior walls, below grade concrete and block work, planter boxes, lift pits and between concrete slab waterproofing applications. MasterSeal HLM 5100TIX is not suitable for direct sticking of tiles; the application of a screed is recommended if tiling is desired. MasterSeal HLM

5100TIX is not suitable for lining water retaining structures.   

Features and benefits   

 

  • Able to move with structure - elastomeric and flexible with good tensile strength
  • Suitable for constantly wet conditions with drainage - once cured will not re-emulsify
  • Inert when cured - resists bacterial attack and salts found in ground waters
  • Monolithic - eliminates lapping, seaming, and precutting
  • Tough and durable - long-term protection
  • Good adhesion to a wide range of substrates - including concrete, render masonry, fibre cement, sheet, timber, clay brick, concrete block, aerated concrete, and treated metal.
  • Root-resistant barrier - suitable for planter boxes and garden beds
  • High viscosity thixotropic liquid – applicable for both horizontal and vertical surfaces (walls &floors)

 

Supply form

High viscosity liquid

Colour /Gloss Level

Black/ Matt

Density (approx.)

1.25 kg/litre

Solids Content

80 ± 0.5% v/v

Application Temperature

(ambient and substrate)

5 C - 35 C

Drying time @ 23 C / 50% RH

Touch Dry

2 hours

Re-coating interval

2-4 hours

Serviceable (backfilling)

24 hours

Full cure

7 days

Elongation

>440%

Water Vapour transmission

0.4g/24h/m2

(ASTM E96)

Shore A hardness

65

Dry Film Thickness min

1.2mm

VOC level (SCAQMD Method 304-91)

<93mg/L

 

Application

Surface Preparation   

For best results, all concrete surfaces should be   off form or lightly steel troweled to a flat, uniform surface. A light broom finish on horizontal areas is acceptable. Membrane curing compounds must be  mechanically removed. Remove dust, dirt and other contaminants just before or during application. Air-void pockmarks or honeycombs must be opened up and repaired with MasterEmaco N 102CI or MasterEmaco N 5100 to fill the cavities completely   

Priming

Prime with a coat of MasterEmaco P 157 diluted up to 1:1 with water. A porous substrate like block   work may require two coats to ensure pores are   sealed or prime with MasterTop 1116 for critical   applications and applications where there is   potential for rising vapour.   Surfaces must be dry at the time of application   

Pre-striping   

Before applying the final membrane, all joints, cracks and openings around protrusions must be sealed by caulking or pre-striping (a preliminary coating of MasterSeal HLM 5100TIX applied with a trowel or stiff-bristled brush). Allow to dry until tack free (approximately 1 hour at 230C) before applying final membrane.   

Static Joints and Cracks

Cracks with a width less than 1.0 mm should be filled by pre-striping as detailed above. Apply material so it fills and overlaps the joint or crack to a width of 50 mm on each side. Control joints up to

3mm should be filled with a suitable sealant.   

Working or Expansion Joints

All joints over 3 mm must be sealed with a suitable urethane sealant. Any working joint less than 3  mm should be routed to a minimum of 6 mm and   filled with a sealant ensuring that the sealant only adheres to the sides by use of a backer rod or   bond breaking tape. Prevent the waterproofing   membrane from adhering to the surface of the joint sealant by applying a coat of wax or bond breaker   tape over the cured sealant and then pre-striping.   

Floor-wall or internal/external corners

In situations like planter boxes or wall floor joints and non-moving installations a cant bead should   be installed. The cant bead can be achieved either through the use of a compatible sealant or a   mortar fillet. As an alternative option, this can be   achieved using MasterSeal 970 tape as detailed in the application guide.   

Metal Surfaces

Remove dust, debris, and any other contaminants from vent, drain pipe and post penetrations, reglets and other metal surfaces. Clean surfaces to near white to SA2.5 and prime immediately with MasterSeal P 692. For powder coated or other permanent coatings consult your local BASF representative.

Application

A test application is always recommended before proceeding with entire application.

MasterSeal HLM 5100TIX is suitable for horizontal   or vertical applications. The material is thixotropic and will spread easily once moved with a brush, roller or trowel. Work out of roller tray to make application easier and the use of a trowel and back rolling especially on horizontal surfaces will make the application easier. Best results are obtained

by marking off 20 m2 areas and evenly spreading the contents of a 15 L unit (0.75mm WFT) with a rubber-edged notched squeegee.

Then repeat for the second coat. For vertical applications, apply two coats by trowel roller or brush at the rate of 0.75L/ m2/coat (750ml/ m2/coat).Verify the applied thickness with a wet film gauge as the work progresses.   

Curing

Appreciable properties develop within 4–6 hours at   23 C and 50% relative humidity. Recoating can occur after 2 hours at these temperatures. Protect   MasterSeal HLM 5200TIX from traffic during   curing and prior to backfilling.   

Drainage and Protection   

For protection during backfill and where hydrostatic pressure is anticipated, use a suitable geotextile and drainage pipes or cells to divert the water.

For protection during backfill only, install protection board as soon as possible following cure of MasterSeal HLM 5100TIX.

MasterSeal HLM 5100TIX has good UV resistance and is compatible with most water based paints. It is good practise to protect the membrane exposed with a water based paint as the aging of the membrane may give a chalky appearance.   

ESTIMATING DATA   

Wet Film Thickness @ 1.5mm = 1m2/litre (1.2mm DFT)

Coverage per 15 litres is approximately 10m2   

PACKAGING   

MasterSeal HLM 5100TIX available in 15 litre pails.   

SHELF LIFE   

MasterSeal HLM 5100TIX has a shelf life of 12 months. Store out of direct sunlight, clear of the ground on pallets protected from rainfall.   

 

Waterproofing FAQ

Membrane Protection Board

Waterproofing Coating

Waterproof Drainage Sheet

Waterproofing Primer

Repair and Maintenance