is a waterproof and UV resistant liquid membrane used for long-term waterproofing and decorative coating of building surfaces. It is applied by brush, roller or spray and cures to form a permanently flexible waterproof membrane that is resistant to weathering for many years. Although the membrane is waterproof it allows the substrate to breathe.
Duro SR is a long life 100% acrylic coating with excellent solar heat reflection. Typically it will reduce the head space temperature under a roof by up to 15C on hot days. Duro SR is effective for 10 or more years in both new and old buildings when applied in accordance with the manufacturers directions. Duro SR may be applied over most building surfaces for heat reflection and
extension of service life.
Duro WBETwo Pack Water Based Epoxy Primer / Coating
is a two component waterbased epoxy priming used to seal concrete and masonry surfaces. lt cures to a tough chemical and water resistant
coating having excellent adhesion to sound concrete.
is a two component water based epoxy coating used to prime seal, and coat concrete and masonry surfaces. It cures to a tough chemical and water resistant coating with excellent adhesion to sound concrete.
PSC Sealer is a state-of-the art fluoro chemical penetrating sealer that penetrates into the minute pores and capillaries of porous substrates such as stone, tile, grout, terracotta, brick and concrete, providing a transparent, durable barrier against water and oils. It can be used to seal leaking shower recesses and balconies (Limitations apply) by penetrating into the grout, concrete and sand / cement beds leaving a water repellent surface, without any need to remove tiles. The formulation is designed to ensure very good penetration on porous substrates. The product works below the surface so that protection is maintained even after surface wear due to traffic.
EPOXY COAT is a two part, waterborne epoxy coating system designed to act as moisture and vapour barrier primarily over cementitious substrates.Water based, user friendly. Low odour. Excellent water resistance. Approved for use with potable. water conforms to AS4020(1999). Excellent adhesion to fresh concrete, brick, masonry. Compressed fibro stone and timber. Applicable to damp surfaces. Resists hydrostatic pressure when cured.
Duro Epoxy Wear is a high performance, two component, water based industrial epoxy coating system available in a range of colours.
Duro Epoxy Wear is designed for floor and wall applications where durability and chemical abrasion resistance is required.
Duro WOS is a water-based, non-flammable, fluoro-chemical solution. It is extremely easy to apply and gives an almost instant water, oil and stain repellence to concrete floors, paths and walls, cement based pavers and tiles, mortar and grouted joints, stone, limestone, terracotta and brick products. Additionally, treated surfaces such as stone, terracotta and concrete show reduced support for the growth of fungus and algae.
DURO BL is a solvent based, mineral reinforced bituminous compound formulated to provide a heavy-duty waterproof / protective coating for use on exposed surfaces above and below ground. It is liquid applied and cures to tough, flexible lining that has an excellent resistance to water, chemical and weathering. DUROPROOF BL has been developed through long research and proven over many years to be a highly successful weatherproof coating for the repair and / or protection of steel roofing and concrete and metal structure in aggressive atmospheric conditions.
ViroCoat- Environmentally friendly, Floor coating for foot and vehicular traffic
is a water based, enVIROnment friendly, tough, durable, single pack, liquid applied, urethane / acrylic, UV resistant protective 'paving-paint type' coating. ViroCoat provides a tough, abrasion resistant, semi-flexible trafficable coating in an attractive finish - all in one can. ViroCoat is a floor protective coating for foot and vehicular traffic and a wall coating where toughness and hardness is required. ViroCoat is available in a range of pleasing colours. Note: If an anti-slip coating is required please refer to ViroTuff data sheet.
is a water based, environment friendly, tough, durable, single pack, liquid applied, urethane/acrylic, UV resistant anti - slip protective 'paving-paint type' coating. Virotuff provides a tough, abrasion resistant, semi-flexible trafficable coating in an attractive finish - all in one can. Virotuff is a slip resistant floor protective coating for foot and vehicular traffic.