is a one component moisture cured polyurethane system for waterproofing planter box internals, roof and deck areas (that are to be paved or covered) and landscaped decks. Excellent flexibilty - accommodates building movement. Single component - ready to use, no mixing required. Excellent chemical resistance. Green Star - meets the benchmark for VOC credit in the Green Building Council of Australia's Rating Tools
ARDEX WPM 172
is a two component liquid polymer waterproofing membrane. The rubber modified bitumen emulsion reacts instantly with catalyst on a dual spray application. This specialist spray equipment allows the material to atomize mid air and start to cure before coming in contact with the substrate. ARDEX WPM 172 is designed to achieve a seamless monolithic membrane that provides excellent adhesion to a wide range of substrates.
ARDEX WPM 300
is a two component water based epoxy polyamide membrane/barrier coating. Can be applied to damp surfaces
AS 4020:2000 Potable Water Approved. Hydrostatic pressure resistant waterproof membrane. Prevents rising damp and formation of efflorescence. Water based - safe to use in sensitive locations. Green Star - meets the benchmark for VOC credit in the Green Building Council of Australia's Rating Tools
ARDEX WPM 179
is a one component liquid applied, latex modified, bituminous elastomeric waterproofing membrane. ARDEX WPM 179 is predominately used as a patching or repair membrane for use in conjunction with ARDEX WPM 172 Rapid Cure Rubber Waterproofing Membrane. Easily applied: single pack, high build, long pot life. Retains flexibility at low temperatures. Resists ponding water (once fully cured). Water based - environmentally friendly and safe to use. Excellent Chemical Resistance properties
ARDEX WPM 368
is a single component acrylic copolymer membrane that will prevent rising damp, efflorescence and will resist negative hydrostatic pressure when used in accordance with the technical data sheet. It has excellent adhesion to most substrates including brick, masonry, concrete block, concrete, stone and is simple to use by brush, roller or airless spray machine. ARDEX WPM 368 single part damp-proof is safe to use and can be over-coated using almost any decorative paint. ARDEX WPM 368 can be applied to damp surfaces and freshly laid hardened (green) concrete and conforms to the Building Code of Australia as a waterproof membrane
Spray-Applied Waterproofing membrane is a polymer-enhanced, single component, fluid applied asphalt emulsion waterproofing membrane. It is designed for roller or spray application to concrete, masonry and other structural substrates, primarily in vertical installations. Tremproof 260 has been tested to AS4020 - 2005 Testing of Products in Contact with Drinking Water and is approved for use with potable water.
TREMproof 60 is a single component, bitumen modified, moisture curing polyurethane fluid applied waterproofing membrane. Available in self-levelling (H) grade or rollable grade (R) for easy application. Highly flexible - over 900% elongation. No seams or laps. Generally no priming required. Single layer application possible. Ready for immediate use (no mixing required). Accomodates crack movement from 0 to 1.6mm when fully cured at 1.3mm thickness. Withstands hydrostatic pressure of up to 4m head of water while bridging a crack of 1.5mm width. Over 15 years proven performance. Available in self-levelling (H) grade or rollable grade (R)for easy application.