Sikadur 52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades,
Normal and Long Potlife for moderate and high ambient temperatures, respectively. S
ikadur 52 may be used to inject and fill cracks between 0.2 - 5 mm wide in a wide variety of constructions applications. Sikadur 52 does not shrink on curing and forms a rigid, high strength product which exhibits excellent adhesion to most construction materials enabling the restoration of structural adequacy to columns, beams, foundations, decks and water retaining structures. Due to its highly penetrative nature Sikadur 52 is ideally suited for application as a primer beneath Sikadur epoxy mortars or Sikafloor mortars and coatings on dense substrates. Sikadur 52 may also be used to stabilise weak and friable substrates. Special high strength grades can be made to order
Sikadur 31 is a thixotropic adhesive mortar based on a 2 component solvent free epoxy resin containing fillers. Sikadur 31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions thereby providing an adhesive mortar ideally suited to site application. It is available in three grades: rapid, normal and long potlife for low, medium and high ambient temperatures respectively. Sikadur 31 may be used as a thin layer levelling mortar, repair mortar or adhesive for most building materials (concrete, brick, stone, ceramics, cement mortar, GRC, fibrous cement, iron and steel and epoxy mortar). Sikadur-31 may also be used to anchor holding down bolts, starter bars etc. as a bonding bridge between old concrete and Sikadur 41 mortar. The material is also ideally suited for bonding of external reinforcement and as a general structural adhesive. Special higher strength grades of the material are available for segmental bridge and other construction
Sikadur 32 is a high performance bonding agent based on a 2 component solvent free epoxy resin ideally suited to a wide range of building and civil engineering applications. Sikadur-32 may be used to bond epoxy mortars, fresh cementitious concrete or mortar to a wide variety of surfaces including mineral substrates (concrete, brick, stone, mortar, GRC, fibrous cement), wood, iron and steel and cured epoxy mortars. Sikadur-32 exhibits excellent adhesion enabling it to be successfully employed in both structural and non-structural situations. Special high strength grades can be made to order.