Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer / coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades,
Normal and Long Potlife for moderate and high ambient temperatures, respectively.
SikaFuko Swell 1 is used to seal construction joints in watertight structures against water and salt water ingress. It is cast into the construction joints with the concrete. To seal the joint, any penetrating water in a first phase activates the three exterior swelling strips on the surface of the SikaFuko Swell 1 hose which starts to swell. The resulting pressure forces the water to try and find an alternative and longer way through the structure, and in the process this effectively seals the joint with the reduction of the water pressure. When necessary, in a second phase, the system can be injected which again causes the water to attempt to find an alternative route and so effectively seals the joint again.
SikaSwell A 2010 M - Hydrophilic joint sealing profile for fresh and salt water contact. Hydrophilic profile for construction joint sealing which swells in contact with water and particularly salt water, such as sea water and water containing de-icing salts.
To Seal: Construction joints. Pipe and steel work penetrations through walls and floor slabs. Construction joints in precast concrete elements. Construction joints in cable ducts, etc. Around all types of penetrations through concrete.
Sika Plug - Cementitious fast setting water plug. Sika Plug is a chloride free, ready for use powder based on high alumina cement. When mixed with water, it becomes a powerful, fast setting waterplug. Ready to use waterplug to stop pressure leaks and seepage through rock and concrete, as well as through joints between concrete and steel (bolt surroundings, ducts, sheetpiles etc.) in culverts, tunnels, dams, basements, pools for short term service life.
High performance joint sealing system for construction, expansion and connection joints as well as for cracks. When fixed to the joint, allows irregular and high movement in more than one direction, whilst maintaining a high quality seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape with advanced adhesion and a various range of suitable Sikadur adhesives
SikaFix HH (au) is a single component hydrophobic polyurethane foam grout that when used alone or with SikaFix HH (au) accelerator, is designed to stop water infiltration and fill voids outside a structure or joint and cracks in concrete structures. It may also be used in applications with high pressure flowing water.
SikaFuko Eco 1 is used to seal construction joints in watertight structures against water and salt water ingress. It is cast into the construction joints with the concrete. When it is necessary to seal or reseal the construction joints, SikaFuko Eco 1 can be injected with the most suitable Sika Injection materials based on acrylic and polyurethane resins or microfine cement suspensions.
Sika Injection Packers are filling valves or ports and connection pieces between the injection equipment and the structure. One way valves are located on the top of the injection packer and connect to the injection equipment. Sika Injection Packers serve as filling valves or ports and connection pieces between the injection equipment and the structure when sealing structures or repairing cracks by injection. They can be used for the injection of various materials.