Duromastic
P15 Diamond is a polyurethane modified copolymer acrylic waterproofing membrane
specifically formulated for bathrooms, laundries, balconies, terraces and other
wet areas. Use Duromastic P15 Diamond prior to installing mortar beds, render
or tiling. The membrane forms a grey coloured water resistant elastomeric film
with excellent durability. Application:
Do not apply externally if
rain is expected presently. Do not apply below 100oC or above 300oC externally.
Ensure that the primer coat is completely dry. Apply evenly and check for
missed areas and pin-holes. Apply further coats from cross directions after 4
to 6 hours. Do not apply as one coat. Apply down into drainage outlets. Use
reinforcing fabric over expansion joints, cracks, all wall and floor junctions,
and pipe penetrations. Apply this by first brushing out a layer of membrane (1-2
mm), next lay in the fabric and ensure there are no air bubbles, and the fabric
is fully set in without wrinkles. Then brush over with more membrane. Good air
flow and warmth will speed drying
Aftek 850PU UV is a one component, thixotropic, polyurethane waterproofing membrane where viscocity of the liquid is paramount. In applications such as sloped roofing, flashing details and under tile waterproofing Aftek PU 850 UV cures to form a durable yet elastic membrane with strong adhesion to many types of substrates. Aftek PU 850 UV is UV Stable and fast curing, and is tack-free in less than two hours, with exceptional elasticity. Due to it's thixotropic, hydrophobic and elastomeric nature, Aftek PU 850 UV is the perfect solution to provide excellent waterproofing on vertical and sloped surfaces without running.
Emerproof 750 Polyurethane Liquid Membrane
The high elasticity, excellent bond and low water
permeability of Emer-Proof 750 make it ideal for a wide range of water vapour
proofing applications such as foundations, basements, tunnels, ground floors,
suspended floors, roof terraces, balconies, patios, bridges, inspection pits,
sewage works, inverted roofs, bathrooms and wet areas. Pitch free formulation n
CSIRO approval and meets AS4858:2004. Non-staining n Readily applied direct
from can. Cures to give permanently flexible resilient barrier over a wide
range of temperatures. Excellent build properties enable application to both horizontal
and vertical surfaces. Can be applied to a wide range of substrates. Outstanding
barrier properties ensure protection against corrosive soil conditions. Irreversible
chemical cure eliminates melting and flow at high temperature. Excellent
resistance to embrittlement.
Emer-Proof 750 is a single-component
polyurethane liquid which cures by reaction with atmospheric moisture to give a
tough elastomeric waterproof membrane. It is supplied as a thixotropic liquid
which is easily applied at the recommended thickness to both vertical and
horizontal surfaces.
Bostik Dampfix PU
One component, highly elastic, class 3, polyurethane waterproofing membrane system that contains no bitumen and complies with AS/NZ 4858. This Technical Data Sheet may be revised, as appropriate, to comply with changes to relevant Australian Standards, reflect changes in Industry best practice in waterproofing procedures or include improvements to current technologies. Bostik Dampfix PU polyurethane waterproofing membrane is specifically formulated for applications where the waterproofing membrane is to be covered by tiling systems laid on an unbonded reinforced screed to falls (ref: Guide to the Installation of Ceramic Tiles - AS3958.1). This is a 2-coat system applied over primed porous & non-porous substrates. It is not recommended as a membrane system in immersed areas (such as pools or spas). Recommended uses:
As a waterproof membrane between the structural substrate & the reinforced unbonded tile screed in both internal & external applications. As a waterproofing membrane to internal wet area shower, bathroom, kitchen, laundry & toilet areas to AS/NZ 3740. As a waterproofing membrane to external balconies & podium levels to AS/NZ 4654.2. All horizontal applications to be covered by a reinforced unbonded screed to falls prior to the application of tile or other surface wearing and protective systems by following trades. Suitable for concrete; cement rendered masonry; FC sheeting; water resistant plasterboard; and structural plywood (Type A Stamped PAA JAS-ANZ to AS/NZS2269-2004)
Duromastic ACS Fibre
is a liquid applied co-polymer membrane containing a fibrous filament reinforcing. When fully cured itforms a flexible waterproof lining for wet areas as tested to class II Australian Standard AS:4858-2004 "Wet Area Membranes". This membrane complies to AS:3740-2004 " Waterproofing of wet areas within residential buildings". It forms a waterproof lining to most building materials including reinforced concrete, cement render, water resistant plasterboard and fibre reinforced cement sheet flooring etc. The surface must be firmly fixed to manufacturers directions, free of protrusions, dirt, oil and other contaminants and surface must be dry. User Areas: Under tile waterproofing. Shower trays and wet areas. Deck and balconies
Sikalastic-590
is one component polyurethane, acrylic dispersion with improved water ponding
resistance, excellent UV resistance, good crack bridging capacity and great aesthetics.
For manual/spray application, Sikalastic-590can be applied as coating ora
reinforced liquid applied membranewithSika-120Reemat. USES: For waterproofing
solutions in both new construction and refurbishment projects. For roofs with many
details and complex geometry when accessibility is limited. For cost efficient life
cycle extension of failing roofs. For reflective coating to enhance energy efficiency
by reducing cooling costs(Sikalastic-590White).Advantages: Good behavior under limited
water ponding. UV resistant and resistant to yellowing and weathering. Highly
elastic and crack-bridging. Non-toxic and VOC compliant water based coating.
One component-ready to use. Excellent adhesion on porous and non-porous substrates.
Seamless waterproofing membrane. Water vapour permeable
.
TREMproof 100
TREMproof
100 is a heavy bodied liquid applied acrylic membrane waterproofing system. Excellent
UV resistance. Trafficable - excellent abrasion resistance. Suits a
wide range of substrates. System enhancement through a range of primers
and top coats to optimise performance. Excellent adhesion. Wide range
of colours. For new construction or refurbishments. Water based, easy
clean up. Ready to use, no mixing required. Waterproofing of; Exposed
roofs. Walkways-Requires double reinforcement, see Usage Guidelines. Parking
decks with light vehicle traffic. Requires double reinforcement Parapet
walls. Plant/mechanical rooms and floors. Internal wet areas. Balconies. Decks.
Requires double reinforcement
Duromix Hibuild WBE
is a two component water based epoxy coating used to prime seal, coat concrete and masonry surfaces. It cures to a tough chemical and water resistant coating having excellent adhesion to sound concrete. Packaging: 20 litre, 4 litre. Water based, user friendly. Low odour. Environmentally friendly. Excellent water resistance. Excellent oil resistance. Excellent adhesion to fresh concrete. Applicable to damp surfaces. Resists hydrostatic pressure when cured. Requires a UV resistant top coat when in direct sunlight. USE AREAS: Fish ponds. Retaining walls. Reverse tanking. Primer for acrylic & polyurethane membrane. Dust sealing concrete floors. Waterproofing concrete slabs before vinyl and timber overlays. Concrete curing membrane. Moisture barrier on damp walls/floors
Duromastic ACS-2 is a two part high solids liquid / cement copolymer membrane with fibre reinforcement. Duromastic ACS-2 cures rapidly to form a flexible waterproof lining for showers and other wet areas as described in Australian Standard AS3740:2004 "Waterproofing wet areas within residential buildings". It complies with AS4858:2004 "Wet Area Membranes". ACS-2 is particularly suitable for applications where polymer modified render will be applied or in conditions where other waterbased waterproofing products have difficulty in drying due to excesive humidity and coolness. Duromastic ACS-2 forms a waterproof lining to most building materials including reinforced concrete, cement render, water resistant plaster board, and compressed cement sheeting etc. The surface must be fixed according to manufacturers directions and must be clean and dry. Duromastic ACS-2 is suitable for external use on light pedestrian trafficable decks, parapets and flashings. Top coat with Duroarmor for UV resistance. Features: Simple application - single pack and water based. Simple application, water based. Fast drying. Good flexibility. Seamless, no joints or cracks. Environmentally friendly. Good resistance to foot traffic
Duroproof PPM Polyurethane Liquid Membrane
Single component polyurea and polyurethane membrane. Duroproof PPM is a high quality, superior performance single component liquid that cures to rapidly to form a polyurea / polyurethane hybrid membrane that is tack-free, high modulus, tough, flexible and suitable for exterior use. Single component, easy to spread. Combines high elongation and tensile strength for excellent toughness. Low odour, low VOC & complies with Green Star requirements. Trafficable and tack-free overnight cure. Good abrasion and tear resistance. Good resistance to weathering. Class III - elongation as per AS/NZ 4858. High build application is possible.
WPA 990 Polyurethane Membrane
WPA 990 is a thixotropic, one part, liquid applied, moisture cured polyurethane waterproofing membrane, suitable for waterproofing most applications. WPA 990 cures to form a seamless, tough, durable, elastomeric waterproofing membrane. WPA 990 has excellent adhesion to most suitably primed building substrates and is suitable for above and below ground applications. Recommended for:
Retaining Walls. Planter Boxes. Internal wet areas, balconies and decks. Rooftops. Exposed applications. Class III membrane in accordance with AS 4858 and AS 4654.1. Fast curing. Tar and Bitumen free. Permanently flexible. Good Chemical resistance. Excellent adhesion to a wide variety of substrates. Single pack.
Duroproof PUM Polyurethane Liquid Membrane
Duroproof PUM is a tough, durable, elastomeric, single pack, liquid applied, moisture curing, cross-linking, polyurethane waterproofing membrane - usually grey in colour. Duroproof PUM forms a tough, flexible, seamless waterproofing membrane designed for both vertical and horizontal surfaces that bonds well to most suitably primed building substrates. Duroproof PUM is formulated as an anti-sag membrane, that although easy to apply by roller or brush, it can be applied on to vertical surfaces without slumping to achieve the require film thicknesses. Single pack, no mixing. Fast curing (usually within 24 hour). Anti-sag (maintains required thickness without slumping on vertical surfaces). Permanently flexible (tests show initial flexibility of > 500%). Will not bleed or stain grout or tiles. Good chemical resistance. High strength and puncture resistant. Provides seamless membrane (no joints or laps)
Easily repaired and or maintained. Odourless when cured. Formulated to provide long term protection. Tar free. Easy to apply.