Kemseal PU Membrane is a fast cure, liquid applied,
polyurethane elastomeric waterproofing membrane which when fully cured forms a
permanently flexible waterproof lining to most building surfaces including reinforced concrete, block work, brick work,
cement render, plaster board, fibre-reinforced cement sheets, particle board
flooring and plywood etc. Single component. Simple application- liquid applied.
Excellent elasticity. Seamless- no joints or cracks. Fast cure- recoat in 2-4
hours. Smooth, Easy to Apply Formulation. Non sag- Vertical and Horizontal
Application. USE AREAS: Planter boxes. Tanking. Retaining Walls. Balconies and
Decks. Shower Recesses. Flashings. Wet Areas. Walls
Tough PU
Tough PU is a high quality UV resistant external
trafficable reinforced membrane. Designed to cope with both pedestrian and, if
reinforced with fibre sheeting; light vehicle traffic. Compliant to class III
category AS4858:2004 - Internal Wet Areas Waterproofing, Compliant to AS
4654.2-2012 - Waterproofing Membranes for External Above Ground Use. Easy to
use. Does not re-emulsify once fully dried. Fibre reinforced. Durable and tough. Flexible & Elastomeric.
Trafficable. UV resistant. Salt and carbon attack resistant. High urethane
content. Internal wet areas, bathrooms and laundries. External wet areas,
balconies, terraces, decks & podiums, garages & parking bays, walkways.
Roof top areas & roofs. Surfaces requiring a strong trafficable
waterproofing membrane.
Sikalastic 488 Polyurethane Liquid Membrane
Sikalastic
-488/488SL is a high performance, hand-applied, low VOC, moisture curing
single-pack elastomeric polyurethane waterproofing membrane. Sikalastic -
488/488SL is directly foot-trafficable.
It
is designed for waterproofing diverse parts of a building including: Balconies
Terraces Podium decks Bathrooms and wet areas Plant room floors Inverted roofs
Undertile beds. UV resistance Seamless membrane High resistance to puncture and
standing water Quick tack-free surface Low VOC High elongation, class III
membrane according to AS/NZS 4858 Crack bridging capability, no reinforcement
needed Elastomeric behaviour Single pack, ready to use Available in various
colours.
Wrimco WBE Epoxy
Wrimco WBE is a high-build, two component waterbased epoxy coating used to prime and
seal concrete and masonry surfaces. It cures to a tough chemical and water
resistant coating having excellent adhesion to sound concrete. Waterbased, user
friendly. Low odour. Excellent water resistance. Excellent adhesion to fresh
concrete. Applicable to damp surfaces. Resists hydrostatic pressure when
cured.Excellent oil resistance.
USE AREAS: Fish Ponds. Retaining Walls. Reverse
Tanking. Waterproofing concrete slabs before vinyl and timber overlays. Primer
for membranes. Dust Sealing concrete floors. Chemical resistant floor, wall
coating. Concrete curing membrane. Moisture barrier on damp walls/floors
Bostik Dampfix PU
One component, highly elastic, class 3, polyurethane waterproofing membrane system that contains no bitumen and complies with AS/NZ 4858. This Technical Data Sheet may be revised, as appropriate, to comply with changes to relevant Australian Standards, reflect changes in Industry best practice in waterproofing procedures or include improvements to current technologies. Bostik Dampfix PU polyurethane waterproofing membrane is specifically formulated for applications where the waterproofing membrane is to be covered by tiling systems laid on an unbonded reinforced screed to falls (ref: Guide to the Installation of Ceramic Tiles - AS3958.1). This is a 2-coat system applied over primed porous & non-porous substrates. It is not recommended as a membrane system in immersed areas (such as pools or spas). Recommended uses:
As a waterproof membrane between the structural substrate & the reinforced unbonded tile screed in both internal & external applications. As a waterproofing membrane to internal wet area shower, bathroom, kitchen, laundry & toilet areas to AS/NZ 3740. As a waterproofing membrane to external balconies & podium levels to AS/NZ 4654.2. All horizontal applications to be covered by a reinforced unbonded screed to falls prior to the application of tile or other surface wearing and protective systems by following trades. Suitable for concrete; cement rendered masonry; FC sheeting; water resistant plasterboard; and structural plywood (Type A Stamped PAA JAS-ANZ to AS/NZS2269-2004)
Roofshield PU
Roofshield PU is a premium quality elastomeric
polyurethane membrane specifically designed to be used as a roof membrane where
a strong UV resistant flexible good quality membrane is required. ROOFSHIELD PU
has a higher urethane content and added fibre resulting in a strong durable
membrane with improved flexibility and longer life. Compliant to class III
category AS4858:2004 - Internal Wet Areas Waterproofing. Compliant to AS
4654.2-2012 - Waterproofing Membranes for External Above Ground Use. Easy to
use. Fibre reinforced. High urethane content. Improved flexibility. High UV
resistance. Durable and tough. Environmentally safe.
Fast drying. Easy clean up. Salt and carbon
attack resistant. USE AREAS: Roofs. Balconies and podiums. External wet areas.
Building facades. Surfaces requiring a high quality UV resistant coating
Elastic Liquid Membrane Sikalastic 560
Economical and eco-friendly liquid applied roof waterproofing solution based on Sika Co-Elastic Technology (CET) UV resistant and resistant to yellowing and weathering. Highly elastic and crack-bridging. Non-toxic and VOC compliant water based coating. One component - ready to use. Excellent adhesion on porous and non porous substrates Seamless waterproofing membrane. Water vapour permeable. 12 months shelf life. Approved in accordance with AS 4020 and AS 4858. Approval for Use in Potable Water and Wet Area applications.
TREMproof 100
TREMproof 100 is a heavy bodied liquid applied acrylic membrane waterproofing system. Excellent UV resistance. Trafficable - excellent abrasion resistance. Suits a wide range of substrates. System enhancement through a range of primers and top coats to optimise performance. Excellent adhesion. Wide range of colours. For new construction or refurbishments. Water based, easy clean up. Ready to use, no mixing required. Waterproofing of; Exposed roofs. Walkways-Requires double reinforcement, see Usage Guidelines. Parking decks with light vehicle traffic. Requires double reinforcement Parapet walls. Plant/mechanical rooms and floors. Internal wet areas. Balconies. Decks. Requires double reinforcement