Durorapid a water based, polymer emulsion waterproofing membrane which incorporates micro fibres thereby internally reinforcing the product. It is a modified Durorapid membrane with the addition of the micro reinforcing fibres. It meets the criteria of AS4858:2004 Wet Area Membranes. It is an elastomeric, environmentally friendly membrane designed for both internal and (non-exposed) external application. It cures to form a durable, odourless, impervious, seamless membrane that resists re-emulsifying after it has fully even if immersed in water. It is available in white, black, grey and blue,minimum quantities apply, does not stain grout or tiles and has excellent resistance to hydrostatic pressure. Being internally reinforced, the need for external reinforcing is eliminated thereby making it easier and quicker to use.
Kemseal PU
Kemseal PU Membrane is a fast cure, liquid applied,
polyurethane elastomeric waterproofing membrane which when fully cured forms a
permanently flexible waterproof lining to most building surfaces including
reinforced concrete, block work, brick work,
cement render, plaster board, fibre-reinforced cement sheets, particle board
flooring and plywood etc. Single component. Simple application- liquid applied.
Excellent elasticity. Seamless- no joints or cracks. Fast cure- recoat in 2-4
hours. Smooth, Easy to Apply Formulation. Non sag- Vertical and Horizontal
Application. USE AREAS: Planter boxes. Tanking. Retaining Walls. Balconies and
Decks. Shower Recesses. Flashings. Wet Areas. Walls.
Sikatite WPU
Water based modified polyurethane waterproofing membrane
for under -tile, and protected applications. SikaTite WPU is a fast curing, UV
stable, single component, class 3 waterproofing membrane. Under -tile, or
protected waterproofing for use on most building substrates including; concrete,
render, screeds, wet area wall sheets, fibre cement sheets, brick and MDF. Excellent
adhesion to most substrates.Fast curing.
Permanently flexible. Approved for use with CTA
tile adhesives, and levelling systems (polymer modified adhesive acceptable). Anti
-Microbial protection Low VOC. Easy clean -up with water and detergent prior to
curing. Complies with Green Building Council of Australia VOC limit
requirements (<250g/L). Appearance / Colour:Thixotropic liquid / Standard grey & White.
Duromastic P15
It is a cross-linking waterborne, high solid content polyurethane membrane. Formulated to provide a membrane with tenacious bond to most surfaces, it is a tough flexible waterproof membrane with a high film strength, that will expand and contract with normal substrate movement. It is supplied as a thixotropic liquid, which is easily applied to both vertical and horizontal surfaces. The formulation is fully optimised to ensure quick tack free time, fast cure, excellent chemical resistance and passes the bleach and immersion test requirements of AS:4858-2004.
Aquagard M Zero VOC:
A unique VOC Free polyurethane liquid membrane. High performance, low odour, one-part, fast curing, high solids, polyurethane elastomer waterproof membrane. It is specially formulated for easy roller application of all permanently flexible, tough, high build, long life waterproof barriers. It is CSIRO certified Class III rating.
Aquagard M Zero VOC is a pure polyurethane elastomer. No bitumen or tar content and will not bleed or stain. Engineered to allow high build application without multilayering and/or reinforcing mat.
Aquagard M Zero VOC is used for:
Wet Areas - bathrooms, shower trays, laundries, toilets, spas.
External - balconies, roof decks, sill or window flashings, podiums, planters.
Tanking - retaining walls, landscaped areas, ponds, water features.
It can be applied to most stable surfaces - block, brick, concrete, render, timber, CFC, GRC, ALC, etc.
Ardex WPM 002
Ardex WPM 002 (Superflex Two Part) is a tough, fast drying two component waterproofing membrane specifically designed for use under tiles. The product
has been uniquely formulated with synthetic microfibers to increase its strength and eliminate the need for a separate reinforcement mat. Wrimco WPM 002 is based on the most advanced acrylic polymer technology, and is totally resistant to re-emulsification. Ardex WPM 002 is flexible, low in odour, and is fully compatible with polymer modified tile adhesives. Wrimco WPM 002 is one of the fastest drying acrylic
membranes on the market - normally ready to tile in 16 - 24 hours @ 23oC.
Wrimco
WPM 002 meets the Green Building Council of Australia Green Star IEQ-13 requirements for Architectural Sealant when tested in accordance with SCAQMD Method 304-91 Determination of Volatile Organic Compounds (VOC) in Various Materials as referenced by South Coast Air Quality Management Division (SCAQMD) Rule 1168.
WPA990PU Polyurethane Liquid Membrane
WPA
990 is a single pack, liquid applied, moisture cured polyurethane waterproofing
membrane, suitable for waterproofing most non-exposed applications. WPA 990
cures to form a seamless, tough, durable, elastomeric waterproofing membrane.
WPA 990 has excellent adhesion to most suitably primed building substrates and
is suitable for above and below ground applications. Recommended for: Retaining
Walls. Planter Boxes. Features and Benefits: Class III membrane in accordance
with AS 4858 and AS 4654.1. Fast curing. Tar and Bitumen free. Permanently
flexible. Good Chemical resistance. Excellent adhesion to a wide variety of
substrates. Single pack
.
Bostik Dampfix PU
One component, highly elastic, class 3, polyurethane waterproofing membrane system that contains no bitumen and complies with AS/NZ 4858. This Technical Data Sheet may be revised, as appropriate, to comply with changes to relevant Australian Standards, reflect changes in Industry best practice in waterproofing procedures or include improvements to current technologies. Bostik Dampfix PU polyurethane waterproofing membrane is specifically formulated for applications where the waterproofing membrane is to be covered by tiling systems laid on an unbonded reinforced screed to falls (ref: Guide to the Installation of Ceramic Tiles - AS3958.1). This is a 2-coat system applied over primed porous & non-porous substrates. It is not recommended as a membrane system in immersed areas (such as pools or spas)
Roofshield PU
Roofshield PU is a premium quality elastomeric
polyurethane membrane specifically designed to be used as a roof membrane where
a strong UV resistant flexible good quality membrane is required. Roofshield PU
has a higher urethane content and added fibre resulting in a strong durable
membrane with improved flexibility and longer life. Compliant to class III
category AS4858:2004 - Internal Wet Areas Waterproofing. Compliant to AS 4654.2-2012 - Waterproofing Membranes for
External Above Ground Use. Easy to use. Fibre reinforced. High urethane
content. Improved flexibility. High UV resistance. Durable and tough.
Environmentally safe. Fast drying. Easy clean up. Salt and carbon attack
resistant. USES: Roofs. Balconies and podiums. External wet areas. Building
facades. Surfaces requiring a high quality UV resistant coating.
Roofshield PU can be applied with a brush or
roller. Apply product at a minimum of 2 coats and at a total coverage of
1.5-2L/m2, forming a dried film thickness of approximately 1.5mm (vertical
0.8mm). Allow 24 hours drying before tiling or topping application. In cool or
non-porous surfaces this may be prolonged. Allow to cure for at least 5 days if
water ponding test is required. At all junctions apply bond breaker or fast
cure mastic fillet. At all junctions embedded polyester/rubber reinforcing tape
into membrane. Do not apply when surface temperature is below 5oC or above 35oC.
Overcoat: Allow at least 4 hours of curing time depending on the weather