Modified PLUS NP180 Base Sheet - Torch on SBS Membrane
Modified PLUS NP180p/p Base Sheet is designed for use as the base or first ply in a high performance two-ply modified bitumen system, or as a single ply when not exposed, and for fillets and detailing. Main applications are for tanking, balconies and roofing and for waterproofing of planters. SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability. Non-woven polyester 180g/m2 reinforcement. Designed for application in new construction, re-roofing and retrofit roofing. Excellent tear resistance.
Modified PLUS NP180 Cap Sheet - Torch on SBS Granule Membrane
Modified PLUS NP180gT4 Cap Sheet is used as a torch applied, top ply in a two-ply roofing system and as a flashing membrane for modified bitumen roofing, conventional built-up roofing and as a maintenance repair material. NP180gT4 is also used as an exposed flashing sheet in Elasto-Seal 790-11 hot rubberized asphalt systems
Ecotorch poly 3mm
Torch on SBS Membrane
Elastomeric polymer bitumen membrane BPE, compound in distilled bitumen modified with high molecular weight polymers, reinforced with non woven polyester strand. Field of Application: base layer or intermediate layer in a multi-layer waterproofing system.
Siplast Anti Roots Membrane Roof Garden SBS membrane
Top layer of a waterproofing system for roof garden - Coating surface under heavy protection. Applied upon: Non accessible flat roofs - Technical flat roofs - Pedestrian terrace - Roof garden or planted terrace - Vehicle access terrace. Length: 8.00 m. Width: 1000 mm. Thickness: 3.0 mm. Product description: Bituminous membrane for roof waterproofing (EN13707). Product identification: GRAVIFLEX. Product application: Torch Application. Data accompanying the CE Marking
Extraflex Anti Roots Sheet Membrane
A polymer elastoplastomeric bitumen membrane based on distilled bitumen modified by high molecular weight polymers added with Preventol B2(r) - a chemical agent against root penetration. Extraflex Antiroot Membrane is reinforced by non-woven polyester continuous strand which is isotropic and very resistant. Extraflex Antiroot Membrane is available with a protected surface of natural slate chippings in a choice of colours.
IKO Torchflex TP180FF Base Torch on SBS Membrane
Composed of a non-woven reinforced polyester reinforcing mat which is coated and impregnated with SBS modified bitumen to a nominal thickness of 3.0 mm (118 mils). A poly film is bonded to each side which disappears during the heat-welding process. This product will satisfy the requirements of CGSB-37.56-M and ASTM D6164.
Torchflex TP-180-FF-Base is constructed using a reinforcing mat of durable non-woven reinforced polyester, which is coated and impregnated with SBS modified bitumen. Both surfaces are covered with a thin poly-film. The top film will melt during the application of the heat welded cap sheet while the bottom film dissolves during heat welding to the substrate. Torchflex TP-180-FF-Base can be used as the "lay-flat" base sheet in a layered membrane construction system. This product will easily satisfy the requirements of CGSB-37.56-M for Class P, Type 2, and Grade 2 materials as well as the requirements of ASTM D6164 for Type I, Grade S materials.
IKO Torchflex TP180 Cap - Torch on SBS Granule Membrane
Torchflex TP-180-Cap is constructed using a reinforcing mat of durable non-woven reinforced polyester, which is coated and impregnated with SBS modified bitumen. Colored ceramic mineral granules cover the surface to provide superior protection against ultraviolet rays, while the underside is covered with a thin poly-film, which disappears upon heat welding. Torchflex TP-180 Cap can be used as the top ply in a B.U.R. system or the top ply in a two-ply modified system. This product will easily satisfy the requirements of CGSB-37.56-M for Class G, Type 2, and Grade 2 materials as well as the requirements of ASTM D6164 for Type I, Grade G materials. Comprised of a non-woven reinforced polyester reinforcing mat which is coated and permeated with SBS modified bitumen to a nominal thickness of 4.0 mm (158 mils). Mineral granules are embedded in the surface to provide superior U.V. protection, while a thin poly-film is bonded to the underside. This product can be applied as the top ply in a two-ply Torchflex system, the top ply in perimeter flashings or as a cap sheet.
Self adhesive membrane Colphene 3000
- Self Adhesive SBS Membrane
Colphene 3000 is a self-adhesive membrane used for foundation waterproofing. Colphene 3000 membrane is made from the most reliable self-adhesive SBS modified bitumen in the industry and a triple-ply polyethylene woven complex for greater suppleness. Colphene 3000 is easy to handle and fits foundation details snugly. It is also used to waterproof underground walls, tunnels or other concrete structures.
Car Park SBS membrane
This product is a high performance reinforced SBS elastomeric bitumen membrane for waterproofing works. The reinforcement is on the upperface. This product is part of the concrete structures waterproofing system as for example car parks or bridges. It can receive directly the bituminous concrete or asphalt protection wearing course.
Self adhesive membrane retaining walls
This is a self adhesive sheet of High Density Polyethylene (HDPE) produced in 1 m wide rolls. This product offers the qualities of HPDE without necessity of using torch. Damp proof membrane to be used as a protection of underground concrete located above the water-table. Also for wet rooms and miscellaneous works in non-critical applications. Main surface black HPDE foil of 0.08 mm UV resistant. Blend Adhesive SBS (Styrene-Butadiene-Styrene) elastomeric bitumen Reinforcement Black HPDE foil of 0.08 mm applied on surface Underface Release film.
Waterproof Flat Roof Liquid Membrane:
Polyurea and Polyurethane Membrane
Single component polyurea and polyurethane membrane. Duro PPM is a high quality, superior performance single component liquid that cures to rapidly to form a polyurea / polyurethane hybrid membrane that is tack-free, high modulus, tough, flexible and suitable for exterior use.Single component, easy to spread. Combines high elongation and tensile strength for excellent toughness. Low odour, low VOC & complies with Green Star requirements. Trafficable and tack-free overnight cure. Good abrasion and tear resistance. Good resistance to weathering. Class III - elongation as per AS/NZ 4858. High build application is possible.
UV Resistant water based membrane
Duraroof is a liquid membrane product based on a unique double crosslinked copolymer system. It does not contain plasticisers or oils that can leach, degrade or contribute to dirt-pickup. Duraroof is used as a fully exposed membrane or beneath a tiled mortar bed. It can withstand occasional light foot traffic. The product is water-based yet offers strong resistance to water ponding. The cured membrane has exceptional flex and elasticity for good crack bridging properties while at the same time maintaining good tensile film strength. Duraroof has excellent resistance to UV, colour fade and chalking. Duraroof membrane is easily maintained, recoated and repaired .The water content is low which enables fast drying, and thick films to be built up quickly. The product is supplied as a thixotropic liquid, which is easily applied to both vertical and horizontal surfaces. It complies fully with the test requirements of AS:4858-2004 "Wet Area Membranes" and passes at Class III, the highest level in the Australian standard.
Aquagard M UVR
An advanced, high performance, one-part, fast curing, high solids, tough, self-levelling polyurethane rubber polymer membrane system designed for exterior use. Aquagard M UVR Membrane provides a highly durable waterproof membrane barrier for roofs and decks. It is CSIRO certified Class III rating to AS/NZS4858. The Aquagard M UVR Membrane is used with Aquagard M Non-Slip Topcoat on foot trafficable areas, including plant room floors, bunds, balconies, roof decks, hoods, podiums, sill or window flashings and exposed pathway areas. It can also be used as a self-levelling membrane under vinyl, synthetic grass, insulation, topping, pavers and tiles. Can be applied to most surfaces. Low VOC system, meets Green Star requirements Membrane is UV Resistant but will discolour on direct UV exposure. Use UV colour-fast Aquagard M Topcoat. Single pack - no mixing and non-stain Easy and low cost to install, maintain or refurbish Quick access for trades Water migration is not possible under roof membrane Waterproof - resists ponded water No hazardous level of toxic substances Compliant with AS4654 "Waterproofing membrane systems for exterior use", as a Class III membrane.
S-80 is a 100% solids fluid applied single component elastomeric silicone
polymer roof coating that cures to provide a long term waterproof and
weatherproof protective seamless membrane layer for roof surfaces. Kemseal S-80
is manufactured using advanced silicone technology to provide superior UV
protection and ponding water resistance that prolongs the life of all existing
roofing systems providing immediate and long term cost and energy savings.
Kemseal S-80 coating (white) meets Cool Roof reflectance performance
requirements for both flat and sloped roofs considerably reducing thermal heat
intake into the building, saving considerable building energy cooling costs. UV-stable top coat for polyurethane and other
membrane coatings. Protective coating to seal and repair existing roofing and
gutter systems. Restore rusted metal and asbestos cement roofing. Restoration
of aged roof membranes such as; torch-on, EPDM, and other sheet and liquid
applied membranes. Lining Box gutters.
Kemseal UV P14 Fibre
Kemseal P14-Fibre is a liquid applied polyurethane
modified copolymer waterproofing membrane containing a fibrous filament
reinforcing. When fully cured, Kemseal P14-Fibre forms a Class III flexible
waterproof lining to showers and wet areas as described in AS 4858- 2004. Waterproofing Wet Areas within Residential
buildings. Kemseal P14-Fibre may be applied to most building materials
including reinforced concrete, cement render, wet area plasterboard, compressed
fibre-cement sheeting, plywood and particleboard wet area flooring. USE AREAS: Shower
Recesses. Wet Areas. Flashings. Balconies and Decks. Exposed Roof. Walls.
Tough PU - Trafficable Polurethane modified Acrylic waterproofing membrane
TOUGH PU is a high quality UV resistant external
trafficable reinforced membrane. Designed to cope with both pedestrian and, if
reinforced with fibre sheeting; light vehicle traffic. Compliant to class III
category AS4858:2004 - Internal Wet Areas Waterproofing, Compliant to AS
4654.2-2012 - Waterproofing Membranes for External Above Ground Use. Easy to
use. Does not re-emulsify once fully dried. Fibre reinforced.
Durable and tough. Flexible & Elastomeric.
Trafficable. UV resistant. Salt and carbon attack resistant. High urethane content.
Internal wet areas, bathrooms and laundries. External wet areas, balconies,
terraces, decks & podiums, garages & parking bays, walkways. Roof top
areas & roofs. Surfaces requiring a strong trafficable waterproofing
for roofs, walls, fascias, balconies
is a waterproof and UV resistant liquid membrane used for long-term waterproofing and decorative coating of building surfaces. It is applied by brush, roller or spray and cures to form a permanently flexible waterproof membrane that is resistant to weathering for many years. Although the membrane is waterproof it allows the substrate to breathe. Use areas: Concrete roofs, Facades, Foot trafficable roof deck membrane, Concrete or blockwork walls, Asbestos roof encapsulation, Parapet Walls.
A single-pack, water dispersed, synthetic rubber polymer, liquid membrane developed
specifically as a tough, durable and permanently elastic waterproof membrane, for all major commercial and residential construction applications. Newflex is ideally suited to indoor and outdoor applications, including roofing, box gutters, balconies, sill & window flashings, podium decks, planters, tanking, ponds & water features, landscaped areas, bathrooms and wet areas.
It can be applied to most sound construction surfaces.
Newflex is suitable for trafficable areas when used in conjunction with Tuffcote Duratop top coating system.
-488/488SL is a high performance, hand-applied, low VOC, moisture curing
single-pack elastomeric polyurethane waterproofing membrane. Sikalastic -
488/488SL is directly foot-trafficable. It is designed for waterproofing diverse
parts of a building including: Balconies Terraces Podium decks Bathrooms and
wet areas Plant room floors Inverted roofs Undertile beds. UV resistance
Seamless membrane High resistance to puncture and standing water Quick
tack-free surface Low VOC High elongation, class III membrane according to
AS/NZS 4858 Crack bridging capability, no reinforcement needed Elastomeric
behaviour Single pack, ready to use Available in various colours
SikaTite PUD Plus
SikaTite PUD Plus - Flexible, water-based polyurethane modified, one-component waterproofing membrane. SikaTite-PUD Plus is suitable for applications to most common building substrates including concrete, fibre cement, plasterboard, gyprock, render, and render brickwork. SikaTite-PUD Plus is suitable for waterproofing of: Decks, Balconies, Roofs. UV Stable. Fast drying. Can be recoated after 1-2 hours @ 20oC depending on amount of coats applied and substrate. Can be used for internal and external waterproofing applications. Sika cement based tile adhesives can be applied over SikaTite-PUD Plus. No reinforcement required. Easy to clean in water Approved in accordance with AS4858:2004 "Wet Area Membranes".