Sika Block Paving Fix - Easy to use, brush in joint filler
Description
Ready to use, moisture curing, jointing compound for paths, patios and driveways
Uses
Domestic driveways
Footpaths
Walkways
Advantages
Fast and easy to use, simply brush in and water
Sets hard and will not wash or blow out
Will not stain pavers
Prevents weed growth and insect attack
Paving may be used immediately after activation
Suitable for narrow joints 2mm - 4mm wide
Cleaning, Storage and Shelf Life
Store unopened in cool, dry conditions
Protect from frost
Clean tools immediately after use with warm soapy water
Instructions for Use
Surface Preparation/Application/ Drying Time
Ensure all joints are dry and free from dirt. Do not apply if temperatures drop below 5 C within drying period. Dry mix contents of bucket by raking through to ensure all the material is loose. Do not try to break up and use any small lumps or add any extra sand. Use in small manageable amounts and avoid
spreading over a large area. Sweep material into the joints making sure each joint is completely filled. If rain is expected prior to hardening, the surface must be protected to ensure a smooth finish. Sweep up any excess material, as it can be difficult to remove once set. Thoroughly soak the joints with a garden hose, set to fine spray or a watering can fitted with a rose. Do not use
a pressure washer. Ensure all joints are fully saturated. Rinse any excess material from the surface. A Block Paving Fix finished surface is safe to walk
upon immediately after activation but ideally should be left to dry. Drying will usually take 1-2 days but full curing may take up to 28 days (depending on the weather conditions). Leave a minimum of 28 days before pressure washing surface.
Health & Safety /Precautions
Do not breathe dust
Avoid contact with skin and eyes
Wear gloves when handling product
Wash hands with soap and water when work completed
Keep out of reach of children